Secure the templet to the workpiece. Place I the tool on the templet and move the tool with the templet guide sliding along the side of the templet.
Straight bit |
| I |
| Templet guide |
Base | I . | r | ||
| I | \ |
|
LDistance ( X )
Workpiece 10 mm
(25/64")
NOTE :
The workpiece will be cut a slightly different size from the templet. Allow for the dis- tance ( X ) between the router bit and the outside of the templet guide. The distance ( X ) can be calculated by using the following equation :
Distance ( X ) =
outside diameter of the templet guide - router bit diameter
2
12