Makita EH7500S dimensions AIR-TIGHT Test, Assembling Carburetor to Engine

Page 18

P 18/ 25

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-8. Carburetor (cont.)

ASSEMBLING

Assemble by reversing the disassembly, cleaning procedure.

AIR-TIGHT TEST

See Fig. 37.

Fig. 37

Carburetor

Nipple for fuel intake

1R127

1.Connect 1R127 to Carburetor.

2.Push up the air pressure until the pressure gauge indicates 0.05 Mpa.

3.The Carburetor is in order

if the air pressure of 0.05 Mpa can be kept for 10 seconds.

Push

ASSEMBLING CARBURETOR TO ENGINE

(1)Connect two Tubes to Carburetor. (Fig. 38)

Fig. 38

Nipple for fuel intake

Black Tube Clear Tube

Image 18
Contents Specification Standard equipment Optional accessoriesNecessary Repairing Tools RepairEngine section DisassemblingAssembling Clutch Section Clutch Drum Spur Gear Shear Blade Adjustment Maintenance IgnitionSpark Plug Assembling Fly Wheel Recoil Starter Reel Notch Starter case Rope Spiral spring DISASSEMBLING, Cleaning CarburetorWrong Assembling of Compression spring AIR-TIGHT Test Assembling Carburetor to EngineSide of Cable bracket Stop Switch Fuel Tube TubingSpark Arrestor Engine Block DISASSEMBLY/ASSEMBLY Fastening Torque Assemblig