Troubleshooting, Semi-Automatic, Manual Override

MANUAL OPERATION

SEMI-AUTOMATIC

TROUBLESHOOTING

This position will let you water your normal program cycle at any time. Each valve’s WATER DURATION will be operated for the program selected.

•Set dial to “SEMI AUTOMATIC”

•Push ON to start watering.

•Push OFF to stop watering.

•Push NEXT to advance to the next valve.

•Return the dial to “AUTO” after watering cycle begins.

(The display will periodically show remaining time on the operating valve.)

MANUAL OVERRIDE

This position will allow you to water any individual valve or valves for a specific time. If you are using a master valve, you can activate for manual override.

•Push the NEXT button to select the valve you wish to water

•Push the + button to set the time you wish to water, the display will show your time.

•Push the NEXT button to select the next valve you

wish to water.

•Push the + button to set time, repeat setting until all valves are set.

•Push the - button to cancel any valves you do not wish to water

If using a master valve or pump, press NEXT until “master” is displayed (after last valve) press the + button. The master is now on while your valves are watering.

SYSTEM OFF

This position will allow shut down of all water programs. (allow 10 seconds to turn-off). For immediate shut down, turn to “SYSTEM OFF” and push OFF button.

SENSOR OVERRIDE

Rain switches or moisture sensors are often used in automatic irrigation systems to not allow automatic watering during rainy or wet conditions.

The Lawn Master provides convenient, sensor hook-up terminals and an override or bypass option. The override option (OFF) lets you simply bypass the sensor for testing. If you are not using a sensor, setting should be “OFF”.

•Set dial to “SPECIAL FEATURES”

•Push NEXT twice, display will show “SensorN”

•Push OFF to override. If not using a RAIN SENSOR, setting should be “OFF”.

•Push ON to activate the RAIN SENSOR. Once installed the RAIN SENSOR will override your programs.

1.All valves do not turn on automatically

2.Cannot Program

3.Controller Skips a Cycle

4.No Display

5.Valve Stays On

6.Valve will not turn on

7.Controller Displays SHORT

Verify program

Check valve common wire for proper hook-up

Check for shorted valve, refer to “Controller Displays SHORT

emove battery [check voltage]. Disconnect power to controller for 1 min. econnect power and reprogram. Reconnect good 9v alkaline battery.

erify start times, time and water days

emove battery [check voltage] Disconnect power to controller for 1 min. econnect power and reprogram. Reconnect good 9V alkaline battery.

Verify watering duration.

. Disconnect valve; check for manual bleed closure.

. Disconnect wire to valve. If still on, valve is bad.

. Check for manual mode; place controller in SYSTEM OFF

. Check solenoids for obstructions or wiring shorts.

. Check valve for rocks or other obstructions or torn or damaged diaphragm.

1.Verify start times, time and water days.

2.Make sure dial is not in SYSTEM OFF

3.Verify program, Review program (page x)

4.Make sure common wire and valve wire are connected.

5.Check solenoid and valve bleed tube.

6.Check for shorted valve; refer to “Controller Displays SHORT

7.Check RAIN SENSOR status (page 8). set to OFF

I. Note valve number flashing.

2.Examine wiring connections for breaks or bad connections. Repair and reconnect.

3.Examine solenoid for shorted connections. Repair and reconnect.

4.Make sure solenoid rating does not exceed capacity of controller.

5.To reset, set dial to AUTO or press any button.

LM-12, LM-9, LM-6 specifications

The Genie LM series is renowned in the realm of lift equipment, offering exceptional capabilities for a variety of aerial applications. Among the most notable models in this series are the LM-12, LM-6, and LM-9. Each of these lifts is designed to cater to the diverse needs of industries such as construction, maintenance, and warehousing, providing reliable access solutions with impressive performance and safety features.

The Genie LM-12 model stands out for its impressive lift height capability, reaching up to 12 feet. This model features a lightweight, compact design, making it highly maneuverable in tight spaces. A key characteristic is its user-friendly control system, which allows operators to manage the lift with ease. The LM-12 is equipped with a robust battery system, ensuring prolonged usage without the need for constant recharging. It also includes safety features such as automatic braking systems and non-slip platforms, ensuring a secure working environment.

Moving to the Genie LM-6, this model is well-suited for indoor applications due to its compact size and low weight, making it easy to transport and position. The LM-6 reaches a maximum working height of 6 feet, ideal for tasks such as shelving and painting in small spaces. This model is designed with an intuitive control panel, enhancing operator efficiency. Additionally, it incorporates advanced stability control systems that provide confidence while working at height.

The Genie LM-9, with its 9-foot lift height, strikes a perfect balance between the features of the LM-12 and LM-6. It’s versatile enough for both indoor and outdoor applications, making it a popular choice among contractors. The LM-9 is characterized by its rugged build quality and efficient battery system, providing reliable performance over extended periods. Safety remains a priority, with features designed to prevent tipping and ensure the safety of operators.

In conclusion, the Genie LM-12, LM-6, and LM-9 models each offer unique features tailored to various applications. From high lift capabilities to compact designs, these lifts encompass the reliability, safety, and efficiency that Genie is known for in the world of aerial access equipment. Whether it’s for indoor maintenance or outdoor construction work, the LM series continues to be an indispensable asset for professionals in a multitude of fields.