Parasound T 3 manual Antenna Connections, FM Antenna Connection

Page 7

ANTENNA CONNECTIONS

4

 

 

In order to receive radio stations you will need to connect different antennas for both FM and AM. Basic FM and AM antennas are supplied with your T 3. Refer to Other Antenna

Options in the Technically Speaking section for detailed information regarding antennas.

FM Antenna Connection

The FM “dipole” antenna Is a pink-hued flexible wire that looks like a “T” when it’s stretched out.

It provides adequate FM reception in many urban and suburban locations. Once connected, you can adjust its position for optimum reception. The ends of the wires at the base of the “T” end in spade lug connectors. The round T 3 FM 75 Ω antenna input is called an F connector.

What You’ll Need:

 

• The supplied dipole antenna

 

• The supplied “balun” transformer adapter

 

• A screwdriver

BALUN CONNECTOR

Before Connecting

Turn off the power to the T 3.

To Connect

1Use the screwdriver to loosen the two screw terminals on the adapter.

2Slide one of the metal spade lugs under each screw terminal.

3Tighten the screw terminals so the spade lugs are firmly secured and not touching each other.

4Press the "balan" adapter on the 75 Ω FM antenna F connector

5Position the antenna for best FM reception.

6Fasten the antenna on the wall or behind the equipment cabinet with small nails or thumbtacks.

Region

RS232 Control

US

EU

 

FM DIPOLE WIRE ANTENNA

YOU SHOULD KNOW

Other FM Antenna Options

You need the balun adaptor to connect the antenna wires and to convert their 300 ohm impedance to the T 3 antenna input’s 75 ohm impedance. Although we have supplied a “folded dipole” antenna with your T 3, you will obtain better reception with a coaxial 75 ohm connection to an outdoor FM or TV/FM antenna or a coaxial 75 ohm connection to your cable TV service. Refer to Technically Speaking for details on other possible FM antenna options.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Amplifier Congratulations and Thank You for Choosing Parasound Thank YOUParasound Staff Keeping Records for Future Reference Tuner Table of ContentsUnpacking and Placement Guidelines for the T What You’ll Need Before ConnectingTo Connect Turn off the power to the T FM Antenna Connection Antenna ConnectionsAM Antenna Connection Antenna ConnectionsConnecting AN Infrared Repeater System to Your T 3 Preamp or Controller Loop Output Jack RS232 Control AC Voltage Selection Switch AC Power ConnectionsReset Switch See Trouble Shooting Region Select SwitchSelecting Radio Stations on the T Remote Control and Front Panel OperationOperating Your T Turning the T 3 On and OffSeek Tuning at the Front Panel Selecting Stations Seek TuningManual Tuning Seek Tuning with the Remote ControlSelecting Stations by Entering Frequency Manual Tuning at the Front PanelSelecting Preset Stations Preset StationsSaving Stations as Presets Activating Auto Memory Saving Stations as Presets Auto MemoryBrowsing through Preset Stations from the Remote Control Selecting Preset Stations on the Front PanelRadio Data System RDS Stereo Mono Buttons and DisplayFront Panel and Remote Control Trouble Probable Cause Remedy Troubleshooting GuideIf All Else Fails -Call Us for Help Servicing Your TBalanced and Unbalanced Input Lines Technically SpeakingComponent Selection Parasound T 3 Design OverviewSignal to Noise Ratio 23 T 3 SpecificationsParasound Products, Inc Battery Street, San Francisco, CA

T 3 specifications

The Parasound T 3 is an advanced stereo tuner designed for true audio enthusiasts who seek high-quality performance and superior sound reproduction. This tuner represents Parasound's legacy in crafting reliable and high-performance audio equipment.

One of the standout features of the T 3 is its impeccable FM and AM reception capabilities. It utilizes a high-quality digital signal processor that significantly enhances sound clarity while minimizing noise and interference. This is especially beneficial for listeners in environments with fluctuating signal strengths, ensuring consistent audio quality.

The T 3 incorporates a sophisticated RF front end that includes a wide bandwidth FM section, enabling reception of both standard FM broadcasts and HD Radio, which delivers enhanced audio quality and numerous additional channels. With its advanced digital processing, the tuner automatically selects the best signal and filters out unwanted noise, resulting in a listening experience that is both rich and detailed.

A notable characteristic of the T 3 is its elegant and user-friendly design. The front panel features an easy-to-read display that indicates the station frequency, signal strength, and mode of operation. Additionally, it includes a multi-function dial for intuitive browsing through preset stations, allowing users to store up to 40 of their favorite channels for quick access.

For audiophiles, the Parasound T 3 supports a variety of output options, including standard analog outputs and digital outputs for those looking to integrate it with a modern audio system. This flexibility ensures compatibility with a wide range of audio components, making it an ideal addition to both traditional and contemporary setups.

Furthermore, the T 3 is engineered with high-end components that deliver minimal distortion and exceptional dynamic range. Its robust construction not only enhances durability but also prevents vibrations that can affect sound quality, thereby ensuring that performance remains uncompromised over time.

With its combination of cutting-edge technology, elegant design, and superior audio performance, the Parasound T 3 stands as a premier choice for anyone seeking a high-quality tuner that elevates their listening experience. Whether you're a casual listener or a dedicated audiophile, the T 3 promises to deliver an unparalleled sonic experience that showcases the best in radio broadcasting.
Top Page Image Contents