Parasound T 3 manual Antenna Connections, AM Antenna Connection

Page 8

5

ANTENNA CONNECTIONS continued

 

 

AM Antenna Connection

The T 3 includes a separate molded plastic loop AM antenna with spade lugs at the end of its two wires. With this antenna, you can receive AM stations in many urban and suburban locations.

What You’ll Need:

• The supplied AM “loop” antenna

Before Connecting

AM LOOP ANTENNA

Turn off the power to the T 3.

To Connect

1Snap the loop antenna into the plastic holder at the far left side of the T 3 rear panel.

2Loosen the GND and AM terminals on the T 3 rear panel. No screwdriver is needed.

3Slide the spade lug from each antenna wire under each of these terminals.

4Tighten these terminals so the spade lugs are firmly secured and not touching each other.

5Position the loop antenna for best AM reception.

Once connected and clipped into its holder, you can swivel the antenna away from the T 3 rear panel to optimize AM reception.

Region

US

EU

 

 

 

 

RS232 Control

CLIP ON

AM LOOP ANTENNA

Image 8
Contents Amplifier Parasound Staff Keeping Records for Future Reference Thank YOUCongratulations and Thank You for Choosing Parasound Table of Contents TunerUnpacking and Placement Guidelines for the T To Connect Before ConnectingWhat You’ll Need Turn off the power to the T Antenna Connections FM Antenna ConnectionAntenna Connections AM Antenna ConnectionConnecting AN Infrared Repeater System to Your T 3 Preamp or Controller Loop Output Jack RS232 Control AC Power Connections AC Voltage Selection SwitchRegion Select Switch Reset Switch See Trouble ShootingRemote Control and Front Panel Operation Operating Your TTurning the T 3 On and Off Selecting Radio Stations on the TSelecting Stations Seek Tuning Manual TuningSeek Tuning with the Remote Control Seek Tuning at the Front PanelManual Tuning at the Front Panel Selecting Stations by Entering FrequencySaving Stations as Presets Preset StationsSelecting Preset Stations Saving Stations as Presets Auto Memory Browsing through Preset Stations from the Remote ControlSelecting Preset Stations on the Front Panel Activating Auto MemoryStereo Mono Buttons and Display Radio Data System RDSFront Panel and Remote Control Troubleshooting Guide Trouble Probable Cause RemedyServicing Your T If All Else Fails -Call Us for HelpTechnically Speaking Balanced and Unbalanced Input LinesParasound T 3 Design Overview Component Selection23 T 3 Specifications Signal to Noise RatioParasound Products, Inc Battery Street, San Francisco, CA

T 3 specifications

The Parasound T 3 is an advanced stereo tuner designed for true audio enthusiasts who seek high-quality performance and superior sound reproduction. This tuner represents Parasound's legacy in crafting reliable and high-performance audio equipment.

One of the standout features of the T 3 is its impeccable FM and AM reception capabilities. It utilizes a high-quality digital signal processor that significantly enhances sound clarity while minimizing noise and interference. This is especially beneficial for listeners in environments with fluctuating signal strengths, ensuring consistent audio quality.

The T 3 incorporates a sophisticated RF front end that includes a wide bandwidth FM section, enabling reception of both standard FM broadcasts and HD Radio, which delivers enhanced audio quality and numerous additional channels. With its advanced digital processing, the tuner automatically selects the best signal and filters out unwanted noise, resulting in a listening experience that is both rich and detailed.

A notable characteristic of the T 3 is its elegant and user-friendly design. The front panel features an easy-to-read display that indicates the station frequency, signal strength, and mode of operation. Additionally, it includes a multi-function dial for intuitive browsing through preset stations, allowing users to store up to 40 of their favorite channels for quick access.

For audiophiles, the Parasound T 3 supports a variety of output options, including standard analog outputs and digital outputs for those looking to integrate it with a modern audio system. This flexibility ensures compatibility with a wide range of audio components, making it an ideal addition to both traditional and contemporary setups.

Furthermore, the T 3 is engineered with high-end components that deliver minimal distortion and exceptional dynamic range. Its robust construction not only enhances durability but also prevents vibrations that can affect sound quality, thereby ensuring that performance remains uncompromised over time.

With its combination of cutting-edge technology, elegant design, and superior audio performance, the Parasound T 3 stands as a premier choice for anyone seeking a high-quality tuner that elevates their listening experience. Whether you're a casual listener or a dedicated audiophile, the T 3 promises to deliver an unparalleled sonic experience that showcases the best in radio broadcasting.