MSSM0126AE/9243AV
ABOUT THE AUTOMATIC WATER SPRINKLER
What To Do First, If the Sprinkler Actuates— I n t h e u n-
likely event of a fire in the basket and ensuing sprinkler actuation, the three wire relay drops out, the basket stops rotating and the unload door releases. The sprinkler system (FIGURE 1) must be manually reset and the machine checked for obvious and hidden damages before being returned to service.
Stopping the Water Spray and Resetting the Sprinkler—
Once the fire (if any) is extinguished, pull down the sprinkler reset handle (FIGURE 2) to stop the water spray and reset the sprinkler. Permit the water to drain from the basket housing and base.
FIGURE 1 (MSSM0126AE)
Location of Sprinkler Enclo-
Checking for Obvious Damage
S H O C K H A Z A R D — E l e c tr i c al power can cause death or severe injury.
Lock OFF and tag out power to the machine main bus at the wall disconnect before check- ing for obvious damage. Power switches on control panel disable only control circuit power in certain electrical boxes.
Inspect the interior for damage, especially the basket surface, support shaft seals,
sure |
FIGURE 2 (MSSM0126AE)
Sprinkler Controls
3