Important Safety Instructions

Save these instructions for future use

This triangle alerts you to the dangerous voltages inside that may be a shock hazard.

This triangle alerts you to important operating and maintenance instructions in this manual.

üAlways use with the correct line voltage. Refer to the manufacturer’s operating instructions for power requirements. Be advised that different operating voltages may require the use of a different line cord and/

or attachment plug.

üDo not install the unit in an unventilated rack, or directly above heat producing equipment such as power amplifiers. Observe the maximum ambient operating temperature listed in the product specification.

üSlots and opening on the case are provided for ventilation; to ensure reliable operation and prevent it from

overheating, these openings must not be blocked or covered. Never push objects of any kind through the ventilation slots. Never spill a liquid of any kind on the unit.

üNever attach audio power amplifier outputs directly to any of the unit’s connectors.

üTo prevent shock or fire hazard, do not expose the unit to rain or moisture, or operate it where it will be exposed to water.

üDo not attempt to operate the unit if it has been dropped, damaged, exposed to liquids, or if it exhibits a distinct change in performance indicating the need for service.

üThis unit should only be opened by qualified service personnel. Removing covers will expose you to hazardous voltages.

üAdhere to all warnings on the unit and in the operating instructions.

üTake precautions not to defeat the grounding or polarization of the units power cord.

üDo not overload wall outlet, extension cords or integral convenience receptacles, as this can result in a risk of fire or electrical shock.

üRoute power supply cords so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which

they exit from the unit.

üThe unit should be cleaned only as recommended.

Communications Notice

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designated to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. It this equipment does cause interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

üReorient the television receiving antenna

üRelocate the AVC-2500 away from the television

üPlug the AVC-2500 into a different AC outlet so that the AVC-2500 and television are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government printing office, Washington, DC 20402, Stock No.004-000-00345-4.

Zpre Zone specifications

The Parasound Zpre Zone is a versatile and compact preamplifier designed for audiophiles who demand high-quality sound in multiple zones. This device integrates seamlessly into both home theater and multi-room audio systems, making it an exceptional choice for diverse audio environments.

One of the standout features of the Zpre Zone is its impressive audio quality. With a low noise floor and high dynamic range, it delivers clear and detailed sound reproduction. The unit employs high-performance op-amps and R-2R resistor ladder DAC technology that ensures excellent analog performance for a pure listening experience. The Zpre Zone supports multiple input options, including RCA, optical, and coaxial digital inputs, allowing users to connect various audio sources, from CD players to streaming devices.

The Zpre Zone is equipped with a robust set of controls, including two zones for separate audio control. This allows users to manage different audio sources across diverse rooms without interference. Each zone can be individually controlled, which is a distinct advantage for households with multiple users seeking different listening experiences simultaneously.

Another notable characteristic of the Zpre Zone is its ease of integration into existing systems. It features 12V trigger outputs that can activate amplifiers or other devices, providing a streamlined operation. The device also includes a remote control for convenient management, and it is compatible with third-party control systems for more advanced setups.

In terms of design, the Zpre Zone is sleek and compact, making it easy to fit into any audio rack or shelf. Its durable chassis is built to last, ensuring longevity and reliability. The front panel provides a clear indication of status with LED indicators, and the user interface is intuitively designed for easy navigation.

Overall, the Parasound Zpre Zone stands out as a powerful and flexible preamp that meets the needs of modern audio enthusiasts. With its combination of high-quality sound, versatile control, and seamless integration capabilities, it is an ideal choice for anyone looking to elevate their listening experience across different spaces. Whether for personal enjoyment or enhancing a home entertainment system, the Zpre Zone offers exceptional value and performance.