Parasound Zpre Zone Operating your Zpre Front Panel Operation On-Off Button, Headphone Jack

Page 8

Operating your Zpre

Front Panel Operation

On-Off Button

Press this button once to turn the Zpre on and press it again to turn it off. When the Zpre is turned on, one of the Source LEDs will light up.

Reminder: When the DC trigger is connected, you cannot turn the Zpre on or off from the front panel or remote control handset.

Headphone Jack

The Zpre headphone output is driven by a high-quality headphone amplifier circuit. It is suitable for headphones with an impedance of 8 Ω or higher. The headphone circuit remains live, even when you press the Mute button.

Infrared Receiver

Infrared signals from the remote control are received through the infrared receiving eye.

Tone Controls and Indicator

The Bass control boosts and cuts low frequencies +/- 8 dB at 100 Hz. The Treble control boosts and cuts high frequencies +/- 8 dB at 10 kHz.

We recommend judicious use of the tone controls. Maximum bass boost at high levels can overload small speakers.

Balance Control

The balance control adjusts relative left and right volume. If clockwise rotation favors the left channel speaker as you face it, the Right and Left connections between your preamplifier and power amplifier or between your power amplifier and speakers are reversed.

Source Selector Knob and Input Indicators

Rotating the Source knob selects the inputs of the Zpre. Each green Source LED 1 – 4 corresponds to the selected input. The knob is designed to rotate continuously to cycle through the inputs when the knob is turned in either direction.

Volume Control Knob

The Volume control adjusts listening level. If your power amplifier has gain controls, they should be adjusted so the Zpre Volume control knob is between the “11 o’clock” and “1 o’clock” position for most listening. The slight resistance you feel when turning the Volume control knob is created by the motor and gears that enable the volume knob to turn via remote control.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents N U a L Zpre Zone Preamplifier Features Important Safety Instructions Zpre Rear Panel Connections Installation and Rack Mounting IntroductionUnpacking Making Connections to your ZpreAudio Input Connections 1 Video Input Connections 1Audio 1 Priority Input Connection Variable Left and Right Output JacksAC Line Cord Connector Video OutputsRS-232 Control DC Trigger Input Jack DC Trigger Loop Out JackTone Controls and Indicator Source Selector Knob and Input IndicatorsVolume Control Knob Operating your Zpre Front Panel Operation On-Off ButtonRemote Control Operation When Priority is ActivatedWhen Priority is Inactive Volume ButtonsReturning your Zpre to Parasound for Service Maintaining Your Parasound ZpreCase of Trouble If All Else FailsZpre Specifications Frequency Response Signal-to-Noise RatioDimensions Power Requirements

Zpre Zone specifications

The Parasound Zpre Zone is a versatile and compact preamplifier designed for audiophiles who demand high-quality sound in multiple zones. This device integrates seamlessly into both home theater and multi-room audio systems, making it an exceptional choice for diverse audio environments.

One of the standout features of the Zpre Zone is its impressive audio quality. With a low noise floor and high dynamic range, it delivers clear and detailed sound reproduction. The unit employs high-performance op-amps and R-2R resistor ladder DAC technology that ensures excellent analog performance for a pure listening experience. The Zpre Zone supports multiple input options, including RCA, optical, and coaxial digital inputs, allowing users to connect various audio sources, from CD players to streaming devices.

The Zpre Zone is equipped with a robust set of controls, including two zones for separate audio control. This allows users to manage different audio sources across diverse rooms without interference. Each zone can be individually controlled, which is a distinct advantage for households with multiple users seeking different listening experiences simultaneously.

Another notable characteristic of the Zpre Zone is its ease of integration into existing systems. It features 12V trigger outputs that can activate amplifiers or other devices, providing a streamlined operation. The device also includes a remote control for convenient management, and it is compatible with third-party control systems for more advanced setups.

In terms of design, the Zpre Zone is sleek and compact, making it easy to fit into any audio rack or shelf. Its durable chassis is built to last, ensuring longevity and reliability. The front panel provides a clear indication of status with LED indicators, and the user interface is intuitively designed for easy navigation.

Overall, the Parasound Zpre Zone stands out as a powerful and flexible preamp that meets the needs of modern audio enthusiasts. With its combination of high-quality sound, versatile control, and seamless integration capabilities, it is an ideal choice for anyone looking to elevate their listening experience across different spaces. Whether for personal enjoyment or enhancing a home entertainment system, the Zpre Zone offers exceptional value and performance.
Top Page Image Contents