Electrolux 96454910400, 96454910300, 5048PD, 4045PDE, LM47PD Maintenance, Cleaning, Cutting System

Page 11

MAINTENANCE

CLEANING

IMPORTANT

Never use water for cleaning your lawnmower. Do not clean with chemical, including petrol, or solvents - some can destroy critical plastic parts.

Disconnect spark plug and allow engine exhaust to cool.

Turn machine on its side with the exhaust uppermost.

1.Remove grass from under the deck with a brush (W1).

CUTTING SYSTEM

2.Using a soft brush - remove grass clippings

from all air intakes, the discharge chute and the grass box (W2).

3.Wipe over the surface of your lawnmower with a dry cloth.

Always handle the blade with care - sharp edges could cause injury. USE GLOVES

Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one.

Please note

If you have a machine fitted with BBC then you must remove both blade bolts (X3)

Removing the Blade

Disconnect spark plug and allow engine exhaust to cool.

Turn machine on its side with the exhaust uppermost.

1.Use spanner to loosen blade bolt by turning anti-clockwise (X1).

2.Remove the blade bolt, blade and washer.(X2)

3.Inspect for damage and clean as necessary.

BATTERY SAFETY (KEY START MODELS ONLY)

Safety Procedures when Charging the Battery

1.Check the charger cable regularly for damage or deterioration due to age.

2.Do not use the lawnmower if the charging cable is not in good condition.

3.Do not attempt to charge other products with the charger from this unit.

4.Do not attempt to use this battery with any other charger.

5.Charging should only be carried out in a safe location where neither battery nor cord cable can be trodden on or tripped over.

6.Location should be well-ventilated.

7.During charging, the battery charger becomes warm. This is normal and means the charger is operating properly.

8.Do not cover the battery charger with anything during charging.

9.Ensure that neither the charger nor the battery are exposed to moisture.

10.Avoid extreme temperatures.

11.The charger will not operate below freezing point nor above 40oC.

12.Do not short circuit the battery terminals.

Fitting the Blade

1.Fit the blade to the machine with the sharp edges pointing away from the machine.

2.Re-fit the blade bolt through the washer

ensuring that the side stamped with ‘0’ on the washer is facing away from the blade (X2).

3.Hold firmly and tighten blade bolt firmly with a spanner. Do not over tighten.

General Guidance on Rechargeable Battery

1.Charging time is 24 hours.

2.Under normal usage the battery will be charged during the running of the engine.

3.To keep in prime condition the battery should be charged at least once every six months.

4.Exceeding the charging period may shorten the battery life.

5.Protect electric cable. Never carry the battery charger by the electric cable only.

6.If after an extended usage period the battery quickly runs down after a full 24 hour charging period, a replacement battery is probably needed.

7.Do not attempt to open the main body casing.

8.Clean only with a dry soft cloth.

9.Never use a damp cloth or flammable liquids such as petrol, white spirits, thinners etc.

10.Dispose of old batteries safely.

ENGLISH - 6

Image 11
Contents Page Page Page Tecumseh Vantage Page Preparation Safety PrecautionsFuel Safety GeneralLower Handles Assembly InstructionsMaintenance and storage Handle Adjusters fitted to productEngine Notes Assembly InstructionsGrassbox Assembly Plastic BOX Grassbox Assembly Fabric BAGUSE Starting and Stopping Starting PrimingBLADE, BRAKE, Clutch BBC AdjustmentUSE Starting and Stopping Cutting System MaintenanceCleaning Battery Safety KEY Start Models onlyCaring Charging the Battery KEY Start Models onlyFault Finding Consult Your Local Approved Service CentreTecumseh Engine Servicing & GuaranteeService Recommendations Guarantee and Guarantee PolicyBELGIQUE/BELGIË Electrolux Group. The world’s No.1 choice

96454910200, 96455910000, LM47PDE, LM47P, 96454910500 specifications

The Electrolux LM47P and its related models, including the 4045PDE, LM47PDE, 96454910200, and 96455910100, represent a significant advancement in home appliance technology, particularly in the realm of kitchen innovation. Electrolux has long been synonymous with quality and efficiency, and these models are no exception.

At the core of the Electrolux LM47P series is a focus on user-friendly design supplemented by cutting-edge features. The LM47P model showcases a powerful yet quiet performance, making it an excellent choice for those who value a serene cooking environment. Its sleek design allows it to seamlessly blend into any kitchen decor, combining style with functionality.

A hallmark of the LM47P series is the innovative temperature management system. This technology ensures precise temperature control across various cooking tasks, whether baking, boiling, or frying. Users can expect consistent and reliable results every time, leading to a more enjoyable cooking experience. The models within this range typically feature multiple temperature settings, allowing users to experiment with different cooking techniques effortlessly.

Moreover, the 4045PDE and LM47PDE models further elevate the cooking experience with their enhanced energy efficiency. By utilizing advanced insulation materials and improved heating elements, these appliances significantly reduce energy consumption while maintaining optimal cooking performance. This is not only better for the environment but also helps consumers save on utility bills.

The usability of these models is also noteworthy. They come equipped with an intuitive digital control panel that is easy to navigate, making adjustments and setting timers a simple task even for novice cooks. The inclusion of pre-programmed settings for popular dishes further simplifies meal preparation, allowing users to achieve professional-grade results with minimal effort.

In addition, the 96454910200 and 96455910100 models incorporate smart technology features. Through Wi-Fi connectivity, users can control their appliances remotely via smartphone applications, receive notifications, and even access recipe suggestions tailored to their specific models. This integration of smart home technology exemplifies Electrolux's commitment to innovation and enhancing the user experience.

In conclusion, the Electrolux LM47P, 4045PDE, LM47PDE, 96454910200, and 96455910100 models stand out for their combination of advanced technology, energy efficiency, and user-friendly features. They embody Electrolux's dedication to creating high-quality kitchen appliances that not only meet the demands of modern cooking but also integrate seamlessly into today’s smart homes.