Electrolux 96454910300, 5048PD Charging the Battery KEY Start Models only, Caring, Fault Finding

Page 12

MAINTENANCE

CHARGING THE BATTERY (KEY START MODELS ONLY)

IMPORTANT:-Replacement batteries will need to be charged before use.

Ensure that neither the charger nor the battery are exposed to moisture

The battery pack can be replaced by unclipping the battery from its housing and disconnecting the battery pack from the battery leads.

How to Charge the Battery

1.Stop your lawnmower.

2.Disconnect the spark plug.

3.Remove the cap from the charging point at the

bottom of the wiring loom.

Y1- Cap, Y2 - Charging Point, Y3 - Wiring Loom.

4.Plug charger lead into connection on battery loom

5.Plug the battery charger into a domestic electric socket.

6.Charging will then commence.

7.Charge for 24 hours.

CARING

At the End of the Mowing Season

1.Replace blade, bolts, nuts or screws, if necessary.

2.Clean your lawnmower thoroughly. Do not clean with chemicals, including petrol or solvents - some can destroy critical plastic parts.

3.Ask your local Service Centre to clean the air filter thoroughly and carry out any service or repairs required.

4.Drain engine of oil and petrol.

Storing your Lawnmower

1.Do not store your lawnmower immediately after use.

2.Wait until the engine has cooled to avoid a potential fire hazard.

3.Clean your lawnmower

4.Store in a cool, dry place where your lawnmower is protected from damage.

FAULT FINDING

8.After charging, disconnect the charger from the socket and charging point.

9.Replace the cap on the charging point.

10.The unit is now ready for use.

Battery Replacement

1.The battery is located underneath a cover behind the engine (Z1).

2.Stop the lawnmower and disconnect the spark plug.

3.Remove the screws from the cover (Z2).

4.Remove cover (Z3) to gain access to the battery.

Engine Maintenance Schedule

Follow the hourly or calendar intervals, whichever occur first. More frequent service is required when

operating in adverse conditions First 5 hours - Change oil.

Every 5 hours or daily - Check oil level. Clean

finger guard. Clean around silencer.

Every 25 hours or every season - Change oil if operating under heavy load or high ambient temperature. Service air cleaner.

Every 50 hours or every season - Change oil.

Inspect spark arrester, if equipped.

Every 100 hours or every season - Clean cooling system*. Replace spark plug.

*Clean more often under dusty conditions, or when airborne debris is present or after prolonged operation cutting tall, dry grass.

Engine Will Not Start

1.Ensure OPC Lever is in the start position.

2.Check that the control lever is in the Fast (run) position

3.Check that there is sufficient fuel in the tank and the cap air vent is clear.

4.Remove and dry the spark plug.

5.Petrol may be stale, replace. Once petrol has been replaced it may take a little time for fresh petrol to filter through.

6.Check that the blade bolt is tight. A loose bolt could cause difficult starting.

7.If the engine will still not start, immediately disconnect the spark plug lead.

CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

Engine Will Not Turn Over (Electrostart only)

1.Ensure OPC Lever is in the start position.

2.Battery flat - start your lawnmower manually.

3.If the engine will still not turn over, immediately disconnect the spark plug lead.

CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

Lack of Engine Power and/or Overheating

1.Check that the control lever is in the Fast (run) position.

2.Disconnect the spark plug lead and allow the engine to cool down.

3.Clean grass clippings and debris from around the engine and air inlets and the underside of the deck including the chute and the fan.

4.Clean the engine air filter (Ask your local Approved Service Centre to clean the engine air filter thoroughly).

5.Petrol may be stale, replace. Once petrol has been replaced it may take a little time for fresh petrol to filter through.

6.If the engine still lacks power and/or is overheating, immediately disconnect the spark plug lead.

CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

Excessive Vibration

1.Disconnect the spark plug lead.

2.Check that the blade is correctly fitted see page 6.

3.If the blade is damaged or worn replace it with a new one.

4.If vibration persists, immediately disconnect the spark plug lead.

CONSULT YOUR LOCAL APPROVED SERVICE CENTRE.

ENGLISH - 7

Image 12
Contents Page Page Page Tecumseh Vantage Page Safety Precautions Fuel SafetyGeneral PreparationAssembly Instructions Maintenance and storageHandle Adjusters fitted to product Lower HandlesAssembly Instructions Grassbox Assembly Plastic BOXGrassbox Assembly Fabric BAG Engine NotesStarting Priming USE Starting and StoppingAdjustment USE Starting and StoppingBLADE, BRAKE, Clutch BBC Maintenance CleaningBattery Safety KEY Start Models only Cutting SystemCharging the Battery KEY Start Models only Fault FindingConsult Your Local Approved Service Centre CaringEngine Servicing & Guarantee Service RecommendationsGuarantee and Guarantee Policy TecumsehBELGIQUE/BELGIË Electrolux Group. The world’s No.1 choice

96454910200, 96455910000, LM47PDE, LM47P, 96454910500 specifications

The Electrolux LM47P and its related models, including the 4045PDE, LM47PDE, 96454910200, and 96455910100, represent a significant advancement in home appliance technology, particularly in the realm of kitchen innovation. Electrolux has long been synonymous with quality and efficiency, and these models are no exception.

At the core of the Electrolux LM47P series is a focus on user-friendly design supplemented by cutting-edge features. The LM47P model showcases a powerful yet quiet performance, making it an excellent choice for those who value a serene cooking environment. Its sleek design allows it to seamlessly blend into any kitchen decor, combining style with functionality.

A hallmark of the LM47P series is the innovative temperature management system. This technology ensures precise temperature control across various cooking tasks, whether baking, boiling, or frying. Users can expect consistent and reliable results every time, leading to a more enjoyable cooking experience. The models within this range typically feature multiple temperature settings, allowing users to experiment with different cooking techniques effortlessly.

Moreover, the 4045PDE and LM47PDE models further elevate the cooking experience with their enhanced energy efficiency. By utilizing advanced insulation materials and improved heating elements, these appliances significantly reduce energy consumption while maintaining optimal cooking performance. This is not only better for the environment but also helps consumers save on utility bills.

The usability of these models is also noteworthy. They come equipped with an intuitive digital control panel that is easy to navigate, making adjustments and setting timers a simple task even for novice cooks. The inclusion of pre-programmed settings for popular dishes further simplifies meal preparation, allowing users to achieve professional-grade results with minimal effort.

In addition, the 96454910200 and 96455910100 models incorporate smart technology features. Through Wi-Fi connectivity, users can control their appliances remotely via smartphone applications, receive notifications, and even access recipe suggestions tailored to their specific models. This integration of smart home technology exemplifies Electrolux's commitment to innovation and enhancing the user experience.

In conclusion, the Electrolux LM47P, 4045PDE, LM47PDE, 96454910200, and 96455910100 models stand out for their combination of advanced technology, energy efficiency, and user-friendly features. They embody Electrolux's dedication to creating high-quality kitchen appliances that not only meet the demands of modern cooking but also integrate seamlessly into today’s smart homes.