Parasound Zpre2 manual Remote Control Functions

Page 10

8REMOTE CONTROL FUNCTIONS

The PTZ-1 remote control has a range of approximately 20 - 25 feet (6 - 7.5 meters). Use only

AAAalkaline batteries in the handset and insert them according to the + and – polarity markings in the battery compartment. The PTZ-1 Off, On, Mute Volume, In 1-4 buttons, Zpre2 Pre Set and Z 1-4 IR Zone # buttons are for the Zpre2. The tuner buttons control the matching Parasound Ztuner.

On and Off Buttons

These have the same function as the Power button on the front panel.

Press On to turn the Zpre2 on. The display will illuminate.

Press Off to turn the Zpre2 off.

These separate buttons enable programming unambiguous “hard” off and on commands into a system controller or to create a macro sequence for a learning-type remote control.

Note: These buttons will not function when the rear panel

Auto-Man switch is set to Auto.

Mute Button

Pressing the Mute button once mutes the signal at the Main Out jacks and Mute will glow red in the display. It does not mute the signal at the Fixed level out jacks or the headphone jack. Press the Mute button a second time to cancel mute.

Volume ^ / v Buttons

These buttons control the rotation of the front panel motorized Level knob, to increase and decrease listening volume levels.

Preamp Input Buttons

The primary purpose of the four buttons just below Preamp, 1/Priority, 2, 3, 4, is to select the Audio and Video source inputs 1-4.

Note: Preamp buttons 5-7 do not function with the Zpre2.

Preamp 1 / Priority Auto Select Button

You can program the Zpre2 to automatically select Audio and Video

Inputs 1 when an audio signal is present at the Audio In 1 jacks. With this priority, Preamp Input 1 will override inputs 2, 3, or 4, even if one of them was already selected.

To enable the Input 1 / Priority auto select function, press and hold the Preamp 1 button for about 3-4 seconds until the Input 1 indicator changes from green to red or orange.

1 Indicator

Function

Green

Priority auto select is not engaged and In 1 is selected manually.

Orange

Priority auto select is enabled and In I is selected manually.

Orange

Priority for In 1 is enabled and In 1 is selected automatically because

 

an audio signal is present.

Red

Priority auto select for In 1 is enabled and another input is selected.

Red

Priority auto select for In 1 is enabled, but no audio signal is present at

 

the Audio 1 In jacks.

Note: After the Audio In 1 source stops playing the In 1 indicator will remain orange until you select another input manually. You can select another input when the 1 indicator is green or red. If 1 glows orange you can select another input only if no audio signal is present or if you disen- gage the Priority auto select. To disable Input 1 Priority auto select press and hold the Preamp 1 button for about 3-4 seconds until the 1 indicator glows green.

Image 10
Contents Page Important Safety Instructions Table of Contents Thank You for Choosing Parasound IntroductionUnpacking Installation and Ventilation Requirements 115v 230v AC Voltage Selector SwitchRack Mounting Rear Panel Connections and Controls Ext External Remote Jack Zone 1 2 3 4 SwitchAuto Man Manual Turn On Switch Automatic Turn On OptionsTrigger Jack AC Power Connections and AC Grounding12V Trigger Jacks Out Trigger JackFront Panel Controls and Display Remote Control Functions Programming a new IR Zone Code Number Pre Set ButtonIR Zone Code Numbers Maintaining Your Zpre2Are YOU Having DIFFICULTY? No soundBefore You Return Any Unit to Parasound for Service Warranty RepairWarranty Repair Parasound ZPRE2 Specifications Page Rev

Zpre2 specifications

The Parasound Zpre2 is a high-performance preamplifier designed to deliver exceptional sound quality and flexibility to audiophiles and home theater enthusiasts alike. Hailing from Parasound, a brand known for its commitment to high-fidelity audio products, the Zpre2 combines advanced technologies with user-friendly features to create an outstanding audio experience.

One of the standout characteristics of the Zpre2 is its compact design, part of Parasound's Zone series, which allows it to fit seamlessly into a variety of installation environments without compromising on performance. Its stylish and elegant design features a sturdy metal chassis that not only looks great but also helps to minimize electromagnetic interference, ensuring a clean and pure sound output.

The Zpre2 is equipped with multiple inputs, including two pairs of stereo RCA inputs, allowing users to connect various audio sources effortlessly. Additionally, it features a built-in USB input for direct connection to computers or digital audio players, enabling high-quality playback from digital sources. The inclusion of a front-panel headphone jack adds convenience, making it easy for users to enjoy private listening sessions.

An important aspect of the Zpre2 is its versatile output capabilities. It provides both variable and fixed RCA outputs, allowing users to connect to amplifiers or powered speakers directly. This flexibility means that the Zpre2 can easily fit into both stereo and multi-channel setups.

The preamplifier boasts a premium-quality analog signal path that utilizes high-end components, ensuring that audio signals are reproduced with accuracy and detail. Parasound’s proprietary circuitry minimizes noise and distortion, making the Zpre2 ideal for discerning listeners who demand the highest fidelity in their audio reproduction.

Another notable feature is the comprehensive control options included with the Zpre2. It comes with a remote control that allows users to adjust volume levels, switch inputs, and mute the output from the comfort of their seat. The intuitive layout of the front panel controls also ensures easy access to essential functions.

In summary, the Parasound Zpre2 preamplifier is a blend of high-fidelity audio performance and practical convenience. Its compact design, versatile connectivity options, premium analog circuitry, and user-friendly controls make it an excellent choice for anyone looking to enhance their audio system, whether for music or home theater applications. With the Zpre2, Parasound continues to uphold its reputation for quality and excellence in audio engineering.