Craftsman 137.37564 manual Right Bevel Adjustment Fig. S, Fig. S Left Bevel Adjustment Fig. T

Page 25

33.9° Right Bevel Adjustment (Fig. S)

1.Set the miter angle to 0°. Fully extend both sliding fences.

2.Loosen the bevel lock handle (1).

3.Set the stop block (2) at 33.9° position by turning the lever (3) clockwise.

4.Using a combination square, check to see if the blade is 33.9° to the table.

5.If the blade is not 33.9° to the miter table, tilt the cutting arm to the left, loosen the locknut (4) on the stop block (2), and turn the bolt (5) in or out with a hex wrench until the blade is 33.9° to the table.

Fig. S

5

4

1

3 2

33.9° Left Bevel Adjustment (Fig. T)

1.Set the miter angle to 0°. Fully extend both sliding fences.

2.Loosen the bevel lock handle (1).

3.Set the stop block at 33.9° position by turning the lever (2) clockwise.

4.Using a combination square, check to see if the blade is 33.9° to the table.

5.If the blade is not 33.9° to the miter table, tilt the cutting arm to the right, loosen the locknut (3) on the stop block (5), and turn the bolt (4) in or out with a hex wrench until the blade is 33.9° to the table.

Fig. T

1

 

2

5

3

 

4

 

! WARNING

To avoid injury from unexpected saw movement:

Before moving the saw, disconnect the power cord from the outlet and lock the cutting arm in the lower position using the stop latch.

NOTE: The stop latch is for carrying or storing the tool. It is NOT to be used for holding the saw while cutting.

●Never carry the miter saw by the power cord or by the switch handle. Carrying the tool by the power cord could cause damage to the insulation or wire connections, resulting in electric shock or fire.

●To avoid injury from flying debris, do not allow visitors to stand behind the saw.

●Place the saw on a firm, level work surface where there is room for handling and proper support for the workpiece.

●Support the saw on a level work surface.

●Bolt or clamp the saw to its support.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Warranty Table of ContentsMotor Product SpecificationsMiter SAW Prohibition SymbolsGeneral Safety Instructions Before Using this Power Tool Power Tool SafetyAlways Wear EYE Wear Hearing ! DangerSpecific Safety Instructions for this Compound Miter SAW Dual Bevel Compound Miter SAW SafetyPage Grounding Instructions Power Supply and Motor SpecificationsGuidelines for Extension Cords Adapter Receptacle Recommended Accessories Accessories and AttachmentsSuppliedNot supplied Tools Needed for AssemblyCombination Square Must be True Carton Contents Know Your Dual Bevel Compound Miter SAW Glossary of Terms Revolutions PER Minute RPM Woodworking TermsInstalling the Miter Handle FIG. a AssemblyInstalling the Dust BAG FIG. C Cutting Head FIG. BInstalling the Safety HOLD- Down Clamp FIG. F Installing the Extension Wing Assembly FIG. DSAW Blade Wrench FIG. E Inserting and Replacing the Laser Batteries FIG. G Removing and Installing the BladeRemoving Blade Fig. H, I, J, K Page Fig. M Mounting the Miter SAWBevel Stop Adjustment AdjustmentsFig. P Right Bevel Positive Stop Adjustment Fig. Q Fig. S Left Bevel Adjustment Fig. T Right Bevel Adjustment Fig. SMiter Scale Indicator FIG. W Miter Angle Adjustment FIG. V, WSquaring the Fence FIG. U QUICK-CAM Miter Table Lock Adjustment FIG Positive Stop Miter Angle Adjustment FIGQUICK-CAM Miter Table Lock Operation FIG Requirements and Safety Sections Before Each USE Assembly and Adjustments SectionsRecommended Accessories OperationPlan Your Work Dress for SafetyInspect Your Workpiece Do not Overreach When SAW is RunningNever cut freehand USE Extra Caution with Large or ODD Shaped WorkpiecesFinishing a cut Body and Hand Position FIG. YBefore freeing jammed material Basic SAW OperationsFig. Z-2 Sliding Fence FIG. BB To Turn SAW on FIG. AAMiter CUT FIG. CC Before Leaving the SAWBevel CUT FIG. DD Cutting Bowed Material FIG. GG Compound CUT FIG. FFFig. JJ Cutting Crown Moulding FIG. KK, LL Bevel/Miter SettingsFig. MM Changing the Belt FIG. MMCrown Molding Chart Maintenance MaintenanceReplacing Carbon Brushes FIG. NN Lower Blade GuardFig. OO Lubrication FIG. OOOr Installing Troubleshooting GuideEYE Protection Parts List for Miter SAW Part a Parts List12 IN. Dual Bevel Compound Miter SAW Model noDescription Size Q’ty I.D. Description Parts List for Miter SAW Part BX635 X636 X637 X62T X63A X639 X63B Description Size ’ty Parts List and Schematic for MotorHere’s what the Repair Protection Agreement* includes Repair Protection AgreementsSU-HOGAR Sears Parts & Repair Service CenterLE-FOYERMC

137.37564 specifications

The Craftsman 137.37564 is a versatile and reliable table saw designed for both professional woodworkers and DIY enthusiasts. Engineered to handle a variety of cutting tasks, this table saw stands out with its powerful performance and user-friendly features.

One of the key characteristics of the Craftsman 137.37564 is its robust motor. With a 15-amp motor, it delivers impressive cutting power that allows users to slice through hardwoods, plywood, and other materials with ease. This motor enables the saw to achieve high RPMs, making it a formidable tool for intricate and demanding projects.

The table saw features a large, durable top made of high-quality materials, ensuring stable support for larger workpieces. This wide surface area not only provides ample space for cutting but also enhances accuracy and control during operation. The table's integrated T-slot allows for easy installation of accessories and jigs, increasing the saw's versatility.

Another significant feature of the Craftsman 137.37564 is its precision fence system. The adjustable fence is designed for quick and easy adjustments, providing straight and accurate cuts every time. The locking mechanism ensures that the fence stays securely in place during cutting, minimizing the risk of errors.

Safety is a paramount consideration in the design of the Craftsman 137.37564. It includes an advanced blade guard and anti-kickback pawls to help protect users from potential accidents. Additionally, the saw incorporates an emergency shut-off switch, allowing users to quickly power down the tool if necessary.

Portability is another advantage of the Craftsman 137.37564. Featuring foldable legs and a compact design, this table saw is easy to transport and store. Whether working in a fixed location or on the go, users can depend on the saw's sturdy construction and reliability.

The Craftsman 137.37564 is compatible with a variety of blades, allowing users to customize their cutting experience according to their specific needs. From crosscuts to rip cuts, this saw is equipped to handle various materials and thicknesses.

In summary, the Craftsman 137.37564 combines power, precision, and safety, making it an excellent choice for both amateur and professional woodworkers. Its outstanding features and thoughtful design ensure that users can accomplish a wide range of woodworking tasks with confidence and efficiency.
Top Page Image Contents