Craftsman C944.511573 instruction manual Before removing them, Transporting and Storage

Page 5

 

& WARNING:

 

t

Blades can throw objectsviolently.

Safety

You can be blinded or injured.

Boots

• Wear safety glasses and boots.

Glasses

 

 

 

 

_,

WARNING:

Blades

move

Allow blades to stop

_IL

momentarily

before removing them

u

 

after the

 

 

trigger

is

 

 

Hazard zone for thrown objects

Blades can throw objects violently.

Others can be blinded or injured.

Keep people and animals 50 feet (15 m) away.

WARNING:

Blades move momentarily after the trigger is released,

The blades can seriously cut you or others,

Allow blades to stop before removing them from the cut.

 

 

f

Instruction

f

Safety Decals

Manual

 

 

,_ WARNING:

Read Instruction Manual

Follow all warnings and instructions.

Failure to do so can result in serious injury.

Keep all parts of your body away from the blade and muffler.

Always push the unit slowly over the ground. Stay alert for uneven side-

walks, holes in the terrain, large roots, etc.

Do not force the unit. Use only for jobs explained in this manual. Use

only for edging. Do not abuse unit. Do not use in rain or wet locations.

To reduce the risk of fire, do not allow

excessive grass, leaves, or grease to accumulate on the attachment.

Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging.

Never operate without blade shield in place and in good working order.

TRANSPORTING AND STORAGE

Do not grasp or hold exposed blade.

Stop powerhead before leaving work area.

Allow powerhead and gearbox to cool

before storing or transporting it in a vehicle.

Store unit and fuel in area where fuel

vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

Store attachment so blade cannot ac- cidentally cause injury.

Store attachment indoors, out of reach of children.

If situations occur which are not cov- ered in this manual, use care and good judgment. If you need assis-

tance, contact your Sears Service Centre.

SPECIAL NOTICE: Exposure to vibra- tions through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers,

hands, and joints of people prone to cir- culation disorders or abnormal swell-

ings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands,

or joints, discontinue the use of this tool and seek medical attention. An anti-

vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely

their physical condition and the condi- tion of this unit.

SAVE THESE INSTRUCTIONS

5

Image 5
Contents €RAFTSMA#J Afety Information Unit Operator SafetyCommercial or Rental USE Jammedmaterialfromthecutting Fuel SafetyDonotusemultiplecords Edging SafetyTransporting and Storage Before removing themHandlebar Assembly Carton ContentsAssembly Knowyour Edger Attachment Depth Adjustment KnobBlade Operating the CouplerSetting the Edging Depth Installing AttachmentHanger Operating Position Always WearBlade Maintenance Maintenance ScheduleCare and Maintenance Task Seasonal Storage Blade Replacement