Cleaning, To Change Engine OIL, Muffler

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove engine oil cap; lay aside on a clean surface.

3.Tip lawn mower on its side as shown and drain oil into a suitable container.

Rock lawn mower back and forth to re- move any oil trapped inside of engine.

. Install cartridge, then replace cover making sure the tabs are aligned with the slots in the back plate. Fasten screw securely.

Back plate

Cartridge

Slot

Cover

Cover tab

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Slowly pour oil down the oil fill spout, stopping every few ounces to check the oi! level with the dipstick.

6.Stop adding oil when you reach the

FULL mark on the dipstick. Wait a minute to allow oil to settle.

7.Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or engine will smoke heavily from the muf- fler on startup.

8.Always be sure to retighten oil dipstick before starting engine.

9.Reconnect spark plug wire to plug.

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every 100

hours of operation or every season, which- ever occurs first. Service air cleaner more

often under dusty conditions.

TO CLEAN AIR FILTER

1.Loosen screw and tilt cover to remove.

2.Carefully remove cartridge.

3.Clean by gently tapping on a flat sur- face. If very dirty, replace cartridge.

_I,CAUTION: Petroleum solvents, such as kerosene, are not to be used to clean car- tridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs

first. Spark plug type and gap setting are shown in the "PRODUCT SPECIFIC-

ATIONS" section of this manual.

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass

and trash. Clean the underside of your mower after each use.

,_I,CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean the underside of your lawn mower by scraping to remove build-up of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep finished surfaces and wheels free of al! gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the

electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in short- ened engine life.

917.389011, 38901 specifications

The Craftsman 38901,917.389011 is a versatile and reliable tool designed for both DIY enthusiasts and professional craftsmen. This model stands out in the vast array of power tools available, combining advanced technology with user-friendly features to enhance productivity and efficiency.

One of the defining characteristics of the Craftsman 38901 is its robust motor. This tool is equipped with a high-performance electric motor that delivers powerful torque and consistent performance across a range of applications. Whether you are working on woodworking projects or home repairs, this motor ensures that the tool can handle even the most demanding tasks with ease.

The 38901 model also incorporates adjustable speed settings, allowing users to customize the tool's performance based on specific needs. This feature is particularly beneficial for tasks requiring precision and control. With a simple adjustment, users can switch between high speed for drilling and lower speeds for delicate tasks, making this tool exceptionally flexible.

Durability is another hallmark of the Craftsman 38901. Constructed with high-quality materials, this tool is designed to withstand heavy use in challenging environments. The rugged exterior protects the internal components from dust, debris, and wear, ensuring longevity and reliability.

Ergonomics is a key consideration in the design of the Craftsman 38901. The tool features an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. This design aspect enhances user comfort, making it suitable for both short jobs and longer, more intensive projects.

In addition to its core features, the Craftsman 38901 is equipped with safety technologies that protect users during operation. This includes thermal overload protection that prevents the motor from overheating and safeguards the tool’s components. The inclusion of safety switches further enhances user protection, making it a reliable choice for developers and hobbyists alike.

Overall, the Craftsman 38901,917.389011 combines power, versatility, and safety in a package that meets the demands of modern craftsmanship. Its cutting-edge features and thoughtful design make it an indispensable tool, whether you are a seasoned professional or tackling home improvement tasks for the first time. With this tool in your arsenal, you can approach any project with confidence, knowing you have the reliability and performance necessary to get the job done right.