Craftsman 917.389011 manual General Operation, IV. Safe Handling of Gasoline, Do not

Page 3

I. GENERAL OPERATION

Read, understand, and follow all instructions on the machine and in the

manual(s) before starting. Be thoroughly familiar with the controls and the proper use of the machine before starting.

Do not put hands or feet near or under rotating parts. Keep clear of the dis- charge opening at all times.

Only allow responsible individuals, who are familiar with the instructions, to oper- ate the machine.

Clear the area of objects such as rocks, toys, wire, bones, sticks, etc., which could be picked up and thrown by blade.

Be sure the area is clear of other people

before mowing. Stop machine if anyone enters the area.

Do not operate the mower when bare- foot or wearing open sandals. Always wear substantial foot wear.

Do not pull mower backwards unless absolutely necessary. Always look down and behind before and while moving backwards.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may richochet back toward the opera-

tor. Stop the blade when crossing gravel surfaces.

Do not operate the mower without proper guards, plates, grass catcher or other safety protective devices in place.

See manufacturer's instructions for

proper operation and installation of accessories. Only use accessories ap- proved by the manufacturer.

Stop the blade(s) when crossing gravel drives, walks, or roads.

Stop the engine (motor) whenever you leave the equipment, before cleaning the mower or unclogging the chute.

Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Never operate machine in wet grass.

Always be sure of your footing: keep a firm hold on the handle; walk, never run.

Disengage the self-propelled mech- anism or drive clutch on mowers so

equipped before starting the engine.

If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibra- tion is generally a warning of trouble.

. Always wear safety goggles or safety glasses with side shields when operating mower.

Ii. SLOPE OPERATION

Slopes are a major factor related to slip & fa!l accidents which can result in severe in-

jury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it. DO:

Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

DO NOT:

Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.

Do not trim excessively steep slopes.

Do not mow on wet grass. Reduced foot- ing could cause slipping.

Iii. CHILDREN

Tragic accidents can occur if the operator

is not alert to the presence of children. Children are often attracted to the machine

and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the trimming area and under the watchful care of another

responsible adult.

Be alert and turn machine off if children enter the area.

Before and while walking backwards, look behind and down for small children.

Never allow children to operate the ma- chine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SAFE HANDLING OF GASOLINE

Use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Use only an approved container.

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling.

Never refuel the machine indoors.

Never store the machine or fue! contain- er where there is an open flame, spark or pilot light such as a water heater or on other appliances.

3

Image 3
Contents Craftsman Your Safety is Involved Yearfull Warranty on Craftsman Lawn MowerGeneral Operation IV. Safe Handling of GasolineDo not General ServiceLawn Mower Performance Lawn Mower MaintenanceTo Assemble Grass Catcher To Install AttachmentsTo Remove Mower from Carton To Unfold HandleMeets Cpsc Safety Requirements Know Your Lawn MowerWithout OIL or Gasoline Mower Engine Speed ADD OIL For Rear BaggingTo Empty Grass Catcher Before Starting EngineTo Stop Engine To Start EngineMowing Tips Before After Every General RecommendationsBefore Each USE LubricationEngine Lawn MowerGrass Catcher Muffler CleaningTo Clean AIR Filter To Change Engine OILCarburetor To Adjust HandleRear Deflector EngineMowing HandleFuel System Squeeze To FoldOther TroubleshootingProblem Cause Correction CylinderNeed More HELP? ProblemSU Seguridad Esta Comprometida Sears, Roebuck and Co., Hoffman Estates, ILNo Hacer OperacionIII. Ninos HacerRJ19LM API SG-SL SAERendimiento DE LA SegadoraMantenimiento DE LA Segadora Para Instalar LOS ACCE$ORIOS Como Preparar SU SegadoraPara Remover LA Segadora DE LA Caja DE Carton Para Montar EL Recogedor DE CospedCumple CON LOS Requisitos DE Seguridad DE LA Cpsc Producto. Aprenda y comprenda sus significadosSegadoras CON Descarga Trasera Como Usar SU SegadoraControl DE Zona DEL Motor Para Convertir LA SegadoraAntes DE Hacer Arrancarelmotor Para Parar EL Motor Para Hacer Arrancar EL MotorOnsejos Para Segar Recomendaciones Generales Tabla DE LubricacionAntes DE Cada USO Segadora Silenciador Para Cambiar EL Aceite DEL MotorFiltro DE Aire Para Limpiar EL Filtro DE AireMotor Motor Otros Problema CausaEst dirigido a un centro de servico Sears Craftsman Rotary Lawn Mower - Model Number KEY DescriptionSAE 30W Briggs & Stratton 4-CYCLE Engine Model Number 122T02-1308=BI Briggs & Stratton 4-CYCLE Engine LOiS64 Carburetor Overhaul KIT DESCRiPTiON 365 691688 Screw Carburetor 404 690272 Washer Governor Service Notes Service Notes Serifs

917.389011, 38901 specifications

The Craftsman 38901,917.389011 is a versatile and reliable tool designed for both DIY enthusiasts and professional craftsmen. This model stands out in the vast array of power tools available, combining advanced technology with user-friendly features to enhance productivity and efficiency.

One of the defining characteristics of the Craftsman 38901 is its robust motor. This tool is equipped with a high-performance electric motor that delivers powerful torque and consistent performance across a range of applications. Whether you are working on woodworking projects or home repairs, this motor ensures that the tool can handle even the most demanding tasks with ease.

The 38901 model also incorporates adjustable speed settings, allowing users to customize the tool's performance based on specific needs. This feature is particularly beneficial for tasks requiring precision and control. With a simple adjustment, users can switch between high speed for drilling and lower speeds for delicate tasks, making this tool exceptionally flexible.

Durability is another hallmark of the Craftsman 38901. Constructed with high-quality materials, this tool is designed to withstand heavy use in challenging environments. The rugged exterior protects the internal components from dust, debris, and wear, ensuring longevity and reliability.

Ergonomics is a key consideration in the design of the Craftsman 38901. The tool features an ergonomic handle that provides a comfortable grip, reducing fatigue during extended use. This design aspect enhances user comfort, making it suitable for both short jobs and longer, more intensive projects.

In addition to its core features, the Craftsman 38901 is equipped with safety technologies that protect users during operation. This includes thermal overload protection that prevents the motor from overheating and safeguards the tool’s components. The inclusion of safety switches further enhances user protection, making it a reliable choice for developers and hobbyists alike.

Overall, the Craftsman 38901,917.389011 combines power, versatility, and safety in a package that meets the demands of modern craftsmanship. Its cutting-edge features and thoughtful design make it an indispensable tool, whether you are a seasoned professional or tackling home improvement tasks for the first time. With this tool in your arsenal, you can approach any project with confidence, knowing you have the reliability and performance necessary to get the job done right.