Craftsman 79240 Full ONE Year Warranty on Craftsman Lawn Edger Attachment, Afety Information Unit

Warranty Statement	2	Service & Adjustments	10
Safety Rules	2	Storage	10
Identification of Symbols	2	Parts List	11
Assembly	6
Operation	7	Spanish	12
Maintenance	9	Parts and Ordering	Back Cover

FULL ONE YEAR WARRANTY ON CRAFTSMAN _;LAWN EDGER ATTACHMENT

When used and maintained according to the operator's manual, if this product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store, Sears Service Center, or other Craftsman outlet in the U nited States for free repair (or replacement if repair proves impossible).

This warranty excludes expendable parts that can wear out from normal use in less than one year.

This warranty applies for only 30 days from purchase date if this product is used for commercial or rental purposes.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

DANGER! This lawn edger can be dangerous! Careless or improper use can cause serious or even fatal injury.

Read and understand the operator's manual before using the lawn edger.

Always wear appropriate ear protection, eye protection and head protection.

_WARNING: When using garden- ing appliances, basic safety precau- tions must always be followed to re-

duce the risk of fire and serious injury. Read and follow all instructions.

This power unit can be dangerous! Operator is responsible for following instructions and warnings on unit and in manual. Read entire operator's manual before using unit! Be thor- oughly familiar with the controls and the proper use of the unit. Restrict the use of this unit to persons who have read, understand and will follow the

instructions and warnings on the unit and in the manual. Never allow chil-

dren to operate this unit=

AFETY INFORMATION

THE UNIT

OPERATOR SAFETY

_,DANGER: RISK OF OUT.

KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA.

Do not attempt to clear away cut ma- terial or hold material to be cut when

the blade is in motion. Make sure

powerhead is stopped and spark plug wire is disconnected (or powerhead is disconnected from power source) when removing jammed material from the cutting blade. Do not grab or hold attachment by the cutting blade.

2