The-Assemblysectionof this manual | Craftsman 917.270711 manual

Craftsman 917.270711 owner manual The-Assemblysectionof this manual, Ringsecurelyin axle groove

rRANSAXLE SHIFTER UNKAGEAND

_DJUSTMENT

The transaxle should _ in neutral when the ge ar-shift.Jeveris in the neutral (N).

:lock gate) position. The adjustment is )reset at the factory;,however, if adjust- 1lent is needed, proceed as follows:

•Make sure tmnsaxle is inneutral (N).

•Loosen two Iocknuts on tie rod.

•-Tum center rod until gearshift lever falls into neutral lock gate on fender console.

•Tighten Iocknuts securely.

Neutral Lock

Gate

Locknuts

Tie

Transaxle

TO ADJUST STEERING WHEEL AUGN- MENT

If steering wheel crossbars are not hori- zontal (left to right) when wheelsare posi- tioned straight forward, remove steering wheel and reassemble per instructions in

the-Assemblysectionof this manual.

JERONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not

adjustable on your tractor.-.!f damage has occurred to affect the front wheel toe-in or

-camber;contact your nearest authorized service center.

TO REMOVE WHEEl: FOR REPAIRS

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not

lose)."

•Repair tire and reassemble.-

•On.. _..ee_ only:.,align grooves_ in rear Wheel hub and axle. Insert square

key,':. _ -_"

•Replace washers and snap retain'rag

ringsecurelyin axle groove.

•Replaceaxlecover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks; tire sealant may be purchased from your local pads

dealer. Tire sealant also prevents tire dry rot and corrosion.

Washers

• Ret=n_ng

	!
Axle Cover	"_Square	Key

(Rear Wheel Only)

TO START ENGINE THAT HAS A WEAK

BATTERY

&CAUTION: Lead-acid batteries gener- ate explosive gases. Keep sparks, flame and smoking materials away from batter- ies. Always wear eye protection when around batteries.

If your battery is too weak to start the

engine, it should be recharged. (See

"BA'I-I:ERY"in the MAINTENANCE sec- tion of this manual).

If=jumper cables', are used for emergency starting, follow this procedure:

JLIMPORTANT: Your tractor Is equiped

with a 12 volt negative grounded system. The other vehical must also be a 12 volt

negative grounded system. Do not use your tractor battery to start other vehicais.

TO ATI'ACHJUMPER CABLES -

•Connect each end of the RED cableto the POSITIVE (+)terminal of each bat-

tery, taking care not to short against chassis.

•Connect one end of the BLACK cable to

the NEGATIVE (-) terminal of fully charged battery.

•Connect the other end of the BLACK

cable to good CHASSIS GROUND, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE

ORDER- =: :

•BLACK cable first from chassis and then from the fully charged battery.

•RED cablelast from both batteries.

917.270711 specifications

The Craftsman 917.270711 is a robust and versatile lawn tractor designed to meet the needs of homeowners and landscape enthusiasts alike. Equipped with powerful features and cutting-edge technologies, this model stands out in the crowded market of lawn care equipment.

At the heart of the Craftsman 917.270711 is a reliable 24 HP Briggs & Stratton Intek V-Twin engine. This engine provides ample power, ensuring smooth operation even in demanding conditions. With a hydrostatic transmission, this lawn tractor offers effortless speed control, allowing users to easily navigate different terrains without the need for manual gear changes. The ergonomic design of the transmission lever enhances the user experience, making it intuitive and user-friendly.

One of the most notable features of the Craftsman 917.270711 is its 42-inch cutting deck. This deck allows for a wide cutting path, significantly reducing mowing time. Additionally, it comes equipped with three adjustable cutting heights, giving users the flexibility to achieve the desired grass length based on seasonal needs or personal preferences. The deck's design ensures efficient grass clipping dispersal, promoting a healthier lawn.

The cutting deck also features a deck wash system, which simplifies maintenance and cleaning. Users can easily attach a hose to the deck wash port, ensuring that the undercarriage remains free from grass buildup and debris.

Comfort is a priority in the design of the Craftsman 917.270711. It includes a comfortable high back seat that provides support during extended use. The tractor's steering wheel is conveniently positioned, ensuring easy maneuverability around obstacles such as trees and flower beds. Moreover, the ergonomically designed controls are within easy reach, providing a seamless user experience.

Safety features are critical in any lawn care equipment, and Craftsman has equipped the 917.270711 with essential safety innovations. A safety switch under the seat ensures that the engine stops if the operator dismounts, preventing accidents.

In summary, the Craftsman 917.270711 lawn tractor is a powerful and efficient machine designed for those seeking quality and convenience in lawn maintenance. With its reliable engine, hydrostatic transmission, adjustable cutting heights, and user-friendly features, it has cemented its position as a dependable choice for homeowners looking to maintain their lawns effortlessly.