Craftsman C944.514610 Pruning Technique, Check for Damaged or Worn Parts, Decals

Page 11

•Watch out for branches immediately behind the branch being pruned. If the chain hits the rear branch, dam- age to the unit may occur.

•Be alert for springback. Watch out for branches that are bent or under

pressure. Avoid being struck by the

branch or the pruner when the ten- sion in the wood fibers is released.

•Keep a clear work area. Frequently clear branches out of the way to avoid tripping over them.

•Long branches should be removed

in several pieces.

PRUNING TECHNIQUE

When ready to cut, accelerate to full

throttle and apply a light cutting pres- sure. DO NOT use back and forth

sawing action.

iSecond cut Third cut

Coil

First cut

Pruning technique

_WARNING: Always stop unit and disconnect spark plug wire (or disconnect powerhead from power source) before performing mainte- nance.

CHECK FOR DAMAGED OR

WORN PARTS

Contact a Sears Service Center for replacement of damaged or worn parts.

• Oil tank - Discontinue use of pruner attachment if oil tank shows signs of damage or leaks.

CHECK FOR LOOSE

FASTENERS AND PARTS

•Bar clamp nut

•Fasteners

1.Make the first cut 6 inches (15 cm) from the tree trunk on the bottom of the limb. Use top of guide bar

to make this cut. Cut 1/3 through the diameter of the limb.

NOTE: When making the second and third cuts, rest the foot of the pruner against the tree limb that is being cut to prevent whipping of the branch.

2.Next, move 2 - 4 inches (5 - 10 cm) farther out on the limb and make a second cut all the way through the limb.

3.Then, make a final cut leaving a 1 - 2 inch (2.5 - 5 cm) collar from the trunk of the tree to avoid dam- age to the tree.

INSPECT AND CLEAN UNIT AND

DECALS

•After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent.

•Wipe off unit with a clean dry cloth.

CHECK CHAIN TENSION

,_ WARNING: Wear protective

gloves when handling chain. The chain is sharp and can cut you even when it is not moving. Make chain ad- justments with lower end supported. Chain tension is very important. Chains stretch during use. This is especially true during the first few times you use your pruner. Always check chain ten-

sion each time you use and refuel your unit.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No C944.514610 €RAFTSMA#JSears Canada, inc., Toronto, Ontario MSB 2B8 Limited TWO 2 Year Warranty on Craftsman Pruner AttachmentCommercial or Rental USE Plan Ahead Fuel Safety for gas powerheadsElectrical Safety for electric powerheads GroundFaultCircuitInterrupter YourauthorizedservicedealerDonotusethepowerheadifthe UnplugtheunitfromthepowerOffandcauseseriousinjury PartsandaccessoriesBuretoradjustments NeverstarttheunitwiththeclutchTransporting and Storage Kickback Safety FeaturesCutonebranchatatime Maintain ControlInstalling Pruner Attach Ment Motorsswitches,furnaces,etcCarton Contents AssemblyLower Shoulder Strap Clamp Shoulder Strap AssemblyPowerhead END Adjusting the Assist HandleOperating the Coupler Installing Optional Attach MentsKnowyourpruner Attachment PrunerImportant Points Installing Attachment HangerPruning Decals Pruning TechniqueCheck for Damaged or Worn Parts Check for Loose Fasteners and PartsCheck Chain Sharpness ChainAdjustmentToolBAR Maintenance =UsethescrewdriverendoftheTo Replace Chain Chain ReplacementChain Adjustment Chain SharpeningSeasonal Storage

51461, C944.514610 specifications

The Craftsman 51461, also known as C944.514610, is a robust and versatile tool designed for both DIY enthusiasts and professionals alike. Built with durability and efficiency in mind, this model is an ideal choice for anyone looking to tackle a variety of projects around the home or job site.

One of the main features of the Craftsman 51461 is its powerful motor, delivering impressive performance for various tasks. Whether you need to drill, drive screws, or work on tougher materials, this tool provides the necessary strength to get the job done effectively. The motor also allows for easy adjustments in speed and torque, making it highly adaptable for different applications.

Incorporating advanced technology, the Craftsman 51461 offers enhanced battery life and charging efficiency. Its compatibility with lithium-ion battery packs ensures that users can work continuously without the frequent interruptions caused by recharging conventional batteries. This feature is particularly beneficial for those who undertake extended projects or work in remote locations where power outlets may not be readily available.

Another noteworthy characteristic of the Craftsman 51461 is its ergonomic design. The tool is crafted to provide a comfortable grip, reducing fatigue during prolonged use. The balanced weight distribution ensures stability while operating, allowing for precision and control. This ergonomic focus not only enhances performance but also prioritizes user safety.

The Craftsman name is synonymous with quality and reliability, and the 51461 model reflects that legacy. Constructed from high-quality materials, it is built to withstand the rigors of daily use while maintaining optimal functionality. Additionally, the tool features a range of accessories and attachments, further enhancing its versatility for various tasks.

In terms of maintenance, the Craftsman 51461 is designed for easy upkeep. Its user-friendly construction allows for straightforward disassembly when necessary, making cleaning and part replacement a breeze.

In conclusion, the Craftsman 51461, or C944.514610, is a top-tier tool that combines power, efficiency, and user comfort. Whether engaging in home improvement projects, crafting, or professional work, this tool stands out with its superior features and technologies, making it a valuable addition to any toolbox.
Top Page Image Contents