Craftsman 51461 Motorsswitches,furnaces,etc, Carton Contents, Assembly, Tools Required

flamesfromwaterheaters,electric

motorsswitches,furnaces,etc.

• Storeattachmentsobladecannotac- cidentallycauseinjury.

• Storeattachmentindoors,outofreach ofchildren.

Ifsituationsoccurwhicharenotcov- eredinthismanual,usecareand goodjudgmentIfyouneedassis.- tance,contactyourSearsService Centre.

SPECIALNOTICE:Exposuretovibra- tionsthroughprolongeduseofgasoline poweredhandtoolscouldcauseblood vesselornervedamageinthefingers, hands,andjointsofpeoplepronetocir-

CARTON CONTENTS

Check carton contents against the fol- lowing list.

Model 0944.514610

•Pruner attachment

•Shoulder strap

•Upper shoulder strap clamp

•Lower shoulder strap clamp (with spacer tabs)

•Shoulder strap clamp screws (2)

•Attachment hanger

•Bar sheath

•Chain adjustment tool (bar tool)

•Hex wrench

•Bar and chain oil

Examine parts for damage. Do not use damaged parts.

NOTE: If you need assistance, or find parts missing or damaged, contact your Sears Service Centre.

ASSEMBLY

_WARNING: If received as-

culationdisordersabnormalswell- ingsProlongeduseincoldweatherhas. beenlinkedtobloodvesseldamagein otherwisehealthypeopleIfsymptoms. occursuchasnumbness,pain,lossof strength,changeinskincolorortexture, orlossoffeelingthefingers,hands, orjoints,discontinuetheuseofthistool andseekmedicalattentionAnanti.- vibrationsystemdoesnotguaranteethe avoidanceoftheseproblemsUsers. whooperatepowertoolsonacontinual andregularbasismustmonitorclosely theirphysicalconditionandthecondi- tionofthisunit.

SAVE THESE INSTRUCTIONS

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

LOOSEN

TIGHTEN Knob

2.Remove the shaft cap from the pruner attachment (if present).

3.Position locking/release button of attachment into guide recess of coupler.

4.Push the attachment into the cou- pler until the locking/release button snaps into the primary hole.

5.Before using the unit, tighten the

knob securely by turning clock- wise.

Coupler Primary Hole

\ // Guide Recess

sembled, repeat all steps to ensure

your unit is properly assembled and all fasteners are secure.

TOOLS REQUIRED

•Hex wrench (provided)

INSTALLING PRUNER ATTACH-

MENT

CAUTION: When removing or instal- ling attachments, place the unit on a flat surface for stability.

PP Release Lower

ShaftAttachment

Button

_WARNING: Make sure the lock-

ing/release button is locked in the pri- mary hole and the knob is securely tightened before operating the unit.