Craftsman 917.2754 owner manual Fuel System, Engine OIL, Cylinders

Page 28

Immediately prepare your tractor for stor- age at the end of the season or if the trac- tor will not be used for 30 days or more.

_ICAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING" in the Maintenance section of this

manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in

the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO

CLEAN BATTERY AND TERMINALS" in the Maintenance section of this manual).

After cleaning, leave cables discon- nected and place cables where they

cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel

hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the car-

buretor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s)into cylinder(s).

3.Turn ignition key to "START" position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors

and cover it to give protection from dust and dirt.

Cover your tractor with a suitable pro- tective cover that does not retain mois-

ture. Do not use plastic. Plastic cannot breathe which allows condensation to

form and will cause your tractor to rust. IMPORTANT: Never cover tractor while

engine and exhaust areas are still warm.

28

Image 28
Contents Jcrrftsmrnj Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation IV, Towi NG ServiceSafe Handling of Gasoline General Service Customer Responsibilities Sears Installation ServiceRepair Protection Agreements Keys For Assembly Install Steering WheelInstall Seat Carton Unpack CartonCheck Battery Operation section for locationChecklist Check for Proper Position of ALL BeltsChecktire Pressure Check Deck LevelnessProperty damage Tractor Lift Lever Plunger Used to releaseTo Adjust Mower Cutting Height To SET Parking BrakeTo Move Forward and Backward StoppingUsing the Reverse Operation System To Operate MowerTo Stop Mower Blades Operating in ReverseMents To Start EngineBefore Starting the Engine Check Engine OIL Level Purge Transmission Automatic Transmission Warm UPMowing Tips AS YOU Complete Regular Service General RecommendationsTractor Operator Presence System Reverse Operation System ROSBlade Removal To Sharpen BladeBattery AIR Filter Clean AIR ScreenEngine Cooling System Cleaning MufflerSpark Plugs IN-LINE Fuel FilterTo Install Mower To Remove MowerTo Level Mower Housing SIDE-TO-SIDE AdjustmentBelt Installation To Replace Mower Blade Drive BeltTo Check and Adjust Brake To Adjust BrakeTo Check Brake To Replace Motion Drive BeltTo Remove Wheel for Repairs To Replace Headlight Bulb Replacing BatteryTo Remove Hood and Grill AS Sembly To Adjust Throttle Control Cable To Adjust CarburetorPreliminary Setting EngineEngine OIL Fuel SystemCylinders Cause Correction ProblemStart Cause ROSProblem Cause Correction OFFPage Schematic Tractor - Model Number 917,275400Electrical Electrical KEY Part DescriptionTractor - Model Number 917,275400 Chassis and Enclosures Tractor - Model Number 917.275400 Chassis and Enclosures KEY Part DescriptionTractor - Model Number Ground Drive CAD Tractor - Model Number 917,275400 Steering Assembly Tractor - Model Number 917.275400 Steering Assembly Optional Equipment KEY PartTractor - Model Number Seat Assembly KEYDecals Wheels & TiresTractor - Model Number Lift Assembly 159460Tractor - Model Number 917,275400 Mower Deck Tractor - Model Number Mower Deck TUVLo8 Tractor Model Number Peerless Transaxle Model Number LTH200020@ 6170 763@ 142117 PTO Set Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXIiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiii Our Home

917.2754 specifications

The Craftsman 917.2754 is a state-of-the-art lawn tractor that stands out in the market for its robust features, advanced technologies, and practical design aimed at enhancing user experience and mowing efficiency. It is particularly favored by homeowners with extensive lawns, thanks to its powerful engine and user-friendly functionality.

One of the key features of the Craftsman 917.2754 is its powerful 24 HP engine, which provides ample horsepower to tackle various terrains and challenging mowing conditions. The engine is not only efficient but also reliable, ensuring that users can depend on it season after season. Coupled with a hydrostatic transmission, the driving experience is smooth, allowing for effortless control over speed and direction without the hassle of shifting gears.

The 42-inch cutting deck of the Craftsman 917.2754 is designed for optimal performance and efficiency. This size makes it perfect for maneuvering in tighter spaces while still covering a significant area of lawn in a single pass. The deck features an adjustable cutting height, allowing users to customize their mowing experience based on grass type and weather conditions, ensuring a clean and precise cut every time.

Another highlight of the Craftsman 917.2754 is its comfortable seating and ergonomic design. The high-back seat provides exceptional support, allowing users to maintain comfort during long mowing sessions. The intuitive control panel is user-friendly, equipped with easy-to-read dials and controls for direct access to critical functions such as throttle and cutting height adjustments.

For added convenience, the Craftsman 917.2754 also includes a tight turning radius, making it easier to navigate around obstacles like flower beds and trees. This feature reduces the need for additional trimming, saving users both time and effort. Furthermore, the integrated mulching capability allows for efficient grass recycling, promoting healthier lawn growth.

Durability is a hallmark of the Craftsman brand, and the 917.2754 exemplifies this with its sturdy construction and long-lasting components. Owners can enjoy peace of mind knowing that their investment is built to withstand the rigors of regular lawn maintenance.

In summary, the Craftsman 917.2754 lawn tractor combines power, efficiency, and comfort into a single machine, making it an excellent choice for homeowners looking to maintain their lawn effortlessly. Its advanced features and practical design set it apart in the lawn care landscape, providing users with a dependable and enjoyable mowing experience.