Parasound Parasound HCA-2205A Specifications Continuous Power Output, Current Capacity, Ratio

Page 10

Parasound HCA-2205A Specifications

Continuous Power Output

220 watts RMS x 5, 20 Hz-20 kHz, 8 Ω, 300 watts RMS x 5, 20 Hz-20 kHz, 4 Ω,

Current Capacity

60 amps peak per channel

Slew Rate

> 130 V/∝second

Frequency Response

5 Hz-100 kHz, +0/-3 dB at 1 watt

Total Harmonic Distortion

< 0.03 % at full power; < 0.01 % typical levels

IM Distortion

< 0.03 %

TIM

Unmeasureable

Dynamic Headroom

> 1.5 dB

Interchannel Crosstalk

>80 dB at 1 kHz

>60 dB at 20 kHz

Input Impedance

33 kΩ

Input Sensitivity

1 V for 28.28 V; THX Reference Level; 1.5 V for full output

S/N Ratio

> 96 dB, THX Reference Level

Damping Factor

> 1000 at 20 Hz

Dimensions

19“ wide x 7“ high x 18“ deep (7 5/8” high with feet)

Power Consumption

1500 watts

Power Requirements

110 Vac-120 Vac

-10-

Image 10
Contents N U a L TableofContents Important Safety Instructions Figure #1 HCA-2205A Front and Rear Panel Drawings Unpacking Installation and Rack MountingVentilation Requirements Input Connections Minimum Speaker Impedance PrecautionsMaking Connections to the HCA-2205A Observing Correct PolarityStandby/Normal Indicators Power Switch Manual Turn OnAC Line Indicator Operating the HCA-2205AMain Power Fuse High Temp IndicatorCurrent Overload LEDs Special Features for the Parasound HCA-2205A If All Else FailsPower Consumption Parasound HCA-2205A Specifications Continuous Power OutputDimensions Power RequirementsParasound Products, Inc

HCA-2205A specifications

The Parasound HCA-2205A is a powerful, multichannel power amplifier that has cemented its place among audiophiles and home theater enthusiasts since its release. Known for its robust performance, the HCA-2205A delivers an impressive 220 watts per channel into 8 ohms and 350 watts per channel into 4 ohms. This high power output, combined with its advanced circuitry, ensures dynamic and clear sound reproduction, making it an excellent choice for high-fidelity audio systems.

One of the defining features of the HCA-2205A is its five-channel configuration. This allows users to build a comprehensive surround sound system, supporting both home theater and music listening environments. The ability to power multiple channels from a single unit simplifies wiring and reduces equipment clutter, providing an efficient solution for audio setups.

The HCA-2205A utilizes a direct coupling design, bypassing capacitive coupling, which enhances its overall sound quality by minimizing distortion and preserving transient response. Additionally, it is equipped with a toroidal power transformer that contributes to its clean power delivery and improved efficiency. This design choice helps to keep the amplifier's performance consistent, even during demanding audio passages.

Moreover, the amplifier features an impressive signal-to-noise ratio, ensuring that the sound remains clean and free from unwanted noise artifacts. This is particularly important for home theaters where dialogue clarity and immersive sound effects are essential. Parasound's commitment to high-quality components is evident in the use of premium capacitors and resistors throughout the HCA-2205A, further enhancing its sonic performance.

Thermal management is another highlight of the HCA-2205A. The unit is designed with substantial heat sinks and ventilation to handle extended listening sessions without overheating. It also incorporates a fan-less design, providing a quiet operation that aligns perfectly with high-end audio environments.

In summary, the Parasound HCA-2205A stands out for its high power, cutting-edge design, and superior sound quality. With its five-channel capability, exceptional build quality, and advanced engineering, it offers a remarkable audio experience for both music lovers and home theater aficionados alike. Whether used in a dedicated listening room or as part of a comprehensive AV setup, the HCA-2205A continues to impress with its reliable performance and fidelity.