Craftsman 917.37172 owner manual Lawn Mower, Tires, Blade Care

Page 13

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rub-

ber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both front wheels.

1.Remove hubcaps, Iocknuts & washers.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/ or drive wheel gear teeth.

4.Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a Sears or other qualified service center.

BLADE CARE

For best results, blade must be kept sharp. Replace a bent or damaged blade.

A CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade & attaching hardware (bolt, lock washer & hardened washer).

Blade adapter

Crankshaft

Key _-

Lockwasher _

,/(

Blade \

bolt Hardened

washerCrankshaft

TO REPLACE BLADE

1.Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

2.Be sure the trailing edge of blade (op- posite sharp edge) is up toward the engine.

3.Install the blade bolt with the lock washer and hardened washer into

blade adapter and crankshaft.

4.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with

approved bolt shown in the Repair Parts section of this manual.

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening the blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of

the straight nail exposed. Place center hole of blade over the head of the nail.

If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

GRASS CATCHER

•The grass catcher may be hosed with water, but must be dry when used.

•Check your grass catcher often for dam-

age or deterioration. Through normal use it will wear. If catcher needs replac- ing, replace only with approved replace-

ment catcher shown in the Repair Parts section of this manual. Give the lawn

13mower model number when ordering.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Crrftsmiin Sears, Roebuck and Co., Hoffman Estates, IL Year Full Warranty on Craftsman Lawn MowerII. Slope Operation General OperationDo not III. ChildrenAPI SG-SL SAE General ServiceNGK BPR6ES Sears Installation Service Lawn Mower MaintenanceLawn Mower Performance To Remove Lawn Mower from Carton To Install AttachmentsKnow Your Lawn Mower Meets Cpsc Safety RequirementsDrive control bar used to engage To Adjust Cutting Height HOW to USE Your Lawn MowerTo Convertmower ADD OIL Before Starting EngineADD Gasoline To Stop EngineMulching Mowing Tips Mowing TipsSee Engine in Maintenance section Lubrication ChartGeneral Recommendations Before Each USETires Lawn MowerBlade Care Engine GearcaseTo Change Engine OIL Lawn Mower To Adjust Cutting Height CleaningAIR Filter MufflerSqueeze To Adjust To Adjust HandleTo Remove Drive Belt To Replace Drive BeltEnginespeed EngineCarburetor Lawn MowerDoes not start Problem Cause CorrectionProblem Despues de manipularlos Hacer OperacionNo Hacer III. NinosNGK Servicio de Instalacion Sears Acuerdos de Protecci6n para la Reparaci6nRendimiento DE LA Segadora Mantenimiento DE LA SegadoraComo Preparar SU Segadora Para Desdoblar EL Mango Para Remover LA Segadora DE LA Caja DE CartonPara Montar EL Recogedor DE ClaSPEDCumple CON LOS Requisitos DE Seguridad DE LA Cpsc Familiaricese CON SU SegadoraVelocidad DEL Motor Como Usar SU SegadoraControl DE LA Impulsion Ajuste DEL MandoSegadoras CON Descarga Trasera Para Convertir LA SegadoraSegadoras CON Descarga Lateral LA Segadora Esta Lista Para LAImportante Antes DE Hacer Arrancar EL Motor Agregue AceiteAgregue Gasolina Para Parar EL MotorConsejos Para Segar Y ACOL- Char Onsejos Para SegarAntes DE Cada USO Recomendaciones GeneralesRuedas DE Impulsion LlantasMotor CajadeengranajesLubricacion Para Cambiar EL Aceite DEL MotorBujja FiltrodeaireLimpieza Limpie Debajo DE LA Cubierta DE LA ImpulsionPara Ajustar EL Mango Para Remover Correa DE ImpulsionPara Cambiar Correa DE Impulsion Carburador MangoSistema DE Combustible MotorAceite DEL Motor CausaProblema Craftsman Rotary Lawn MOWER- Model Number KEY Craftsman Rotary Lawn Mower - Model NumberPart KEY Description Craftsman Rotary Lawn 134 KEY Part DescriptionHonda 4-CYCLE Engine Model Number GCV160-AS3A Label Choke Choke KEY Part Description Honda 4-CYCLE EngineHonda 4-CYCLE Engine Model Number GCV160-AS3A Flywheel KEY Part Description Service Notes Service Notes Your Home

917.37172 specifications

The Craftsman 917.37172 is a powerful and reliable lawn tractor that is designed to tackle a variety of yard maintenance tasks with ease. This machine is ideal for homeowners with medium to large lawns, offering performance, durability, and user-friendly features.

One of the standout features of the Craftsman 917.37172 is its 17.5 horsepower Briggs & Stratton engine. This reliable engine provides ample power for cutting grass, tackling inclines, and operating various attachments. The engine's design ensures smooth operation and long-lasting performance, allowing users to complete their lawn care quickly and efficiently.

This lawn tractor is equipped with a 42-inch cutting deck that provides a wide mowing path, reducing the time it takes to cut the grass. The cutting height can be easily adjusted with a simple lever, allowing for customization based on the type of grass and desired finish. The deck design promotes effective grass discharge and mulching, leading to a healthier lawn.

The Craftsman 917.37172 features a comfortable and ergonomic seat, ensuring that users can mow for extended periods without discomfort. The tractor's steering system is designed for ease of use, enabling tight turns and maneuverability around flower beds and garden borders. The dashboard displays essential information, such as fuel levels and operating hours, making it easy for users to monitor the machine's status.

In addition to its mowing capabilities, the Craftsman 917.37172 supports attachments such as baggers and mulch kits, which enhance its functionality for yard maintenance. These accessories are easy to attach and remove, making it a versatile tool for any homeowner.

Another significant aspect of the Craftsman 917.37172 is its durable construction. Built with high-quality materials and a robust frame, this lawn tractor is designed to withstand the rigors of regular use. The tires provide excellent traction, ensuring stability and performance on various terrains.

In conclusion, the Craftsman 917.37172 is a formidable ally for homeowners seeking to maintain their lawns efficiently. With its powerful engine, versatile cutting options, comfortable design, and durable construction, this lawn tractor stands out as a valuable investment for any yard care routine. Whether tackling a small yard or a larger property, the Craftsman 917.37172 delivers performance and reliability, making lawn maintenance a more enjoyable experience.
Top Page Image Contents