Cleaning, Rear Deflector | Craftsman 917.370741 instruction

CLEANING

IMPORTANT:Forbestperformance,keep mowerhousingfreeof built-upgrass and trash• Cleanthe undersideof your mower aftereach use.

_iLCAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean underside of mower by scraping to remove build-up of grass and trash•

•Clean engine often to keep trash from

accumulating. A clogged engine runs hotter and shortens engine life.

_WARNING: To avoid serious injury, before performing any service or adjust- ments:

1.Release control bar and stop engine•

2.Make sure the blade and all moving parts have completely stopped•

3.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual•

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position• If the deflector becomes damaged, it should be replaced•

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the

electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in short- ened engine life.

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a sea- son. Scrape underside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside of drive cover•

4.Remove idler arm assembly from housing by removing hex nut; then remove drive belt from drive pulley, belt keepers and idler arm assembly.

5.Turn lawn mower on its side. Make sure air filter and carburetor are up.

6.Remove screw securing debris shield. Note that the debris shield has a tab

which fits into a gap in the housing.

Crankshaft

Housing hole	adapter

Hardened washer

Blade

TO REMOVE DRIVE BELT

1. Disconnect spark plug wire from spark
plug and place wire where	it cannot
come in contact with plug.

Debris shield

Trailing edge--

bolt

. Remove screws retaining drive cover (not shown); and remove drive cover from lawn mower housing.

. Remove drive cable from anchor, then detach it and return spring from idler arm assembly.

Drive iulley _ _......--Drive cable anchor

_-__es _- _- - \

/	F / -\
_	_bell		![	(
'L\\ ''-_-'_ /_		,"	__ .%\_	_
Belt		__r		m
'__		__r
keepers			spring assembly 16

7.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

8.Remove blade bolt.

9.Remove blade, attaching hardware (bolt, lock washer, hardened washer),

thatbladetheadapterdebris andshielddebrishas shielda tab . whichNote fits into the housing hole.

10.Removedrivebeltfromenginepulley; discard old belt.

• Place new drive belt on engine pulley•

. Route the other end of the new drive i O REPLACE DRIVE BELT

belt through hole in housing•

917.370741 specifications

The Craftsman 917.370741 is a reliable and robust riding lawn mower designed to tackle various lawn maintenance tasks with ease and efficiency. Built with user-friendly features and advanced technology, this model stands out as a preferred choice for homeowners seeking durability and performance in their outdoor equipment.

One of the primary features of the Craftsman 917.370741 is its powerful engine. Equipped with a 24 HP Briggs & Stratton V-twin engine, this mower offers superior performance, ensuring that users can handle even the toughest grass and terrain with confidence. The engine is designed for enhanced fuel efficiency, which translates to longer mowing sessions without the need for frequent refueling.

The mower features a 42-inch cutting deck, allowing for a wide cutting path that reduces mowing time. This deck is constructed from sturdy materials, designed to withstand the rigors of outdoor use while providing a clean and even cut. The mowing height can be easily adjusted from 1.5 to 4 inches, allowing users to customize the cutting height to suit their lawn's specific needs.

Another notable characteristic of the Craftsman 917.370741 is its ease of maneuverability. The mower is equipped with a hydrostatic transmission, which allows for seamless speed changes without the need for shifting gears. This feature enables smoother operation and increased control, making it easier for users to navigate around landscaping, trees, and other obstacles.

The riding mower is also designed with comfort in mind. It features a high-back seat that provides ample support during long mowing sessions, reducing fatigue. The ergonomic controls are easy to reach, ensuring that users can operate the mower efficiently without straining.

In terms of maintenance, the Craftsman 917.370741 is designed for longevity. The engine has an easy-access oil filter and offers quick-release blades for convenient maintenance and replacement. Additionally, the mower’s construction uses corrosion-resistant materials, increasing its durability and lifespan.

Finally, the Craftsman 917.370741 comes equipped with safety features that protect both the user and the machine. The mower includes an automatic blade brake, ensuring that the blades stop quickly when the operator leaves the seat. This feature enhances safety, especially on uneven terrain where accidents could occur.

Overall, the Craftsman 917.370741 combines power, precision, and comfort, making it a top choice for anyone looking to maintain their lawn effectively and efficiently. With its robust engine, easy maneuverability, and thoughtful design, this riding mower is well-suited for a variety of lawn care tasks.