General Recommendations, Ros | Craftsman 917.27481 specification

FILL	IN DATES
REGULAR		SERVICE
	Check	Brake		Operation
	Check	Tire	Pressure
	Check	Operator			Presence	and
T	ROS	Systems
R	Check	for	Loose		Fasteners
A	Sharpen/Replace				Mower	Blades
C	Lubrication		Chart
0	Check	Battery		Level

aClean Battery and Terminals Check Transaxle Cooling Check V-Belts

Check Engine Oil Level

Change Engine Oil (with oil filter)

EChange Engine Oil (without oil filter) N Clean Air Filter

G Clean Air Screen

Inspect Muffler/Spark Arrester

EReplace Oil Filter (If equipped) Clean Engine Cooling Fins

Replace Spark Plug

Replace Air Filter Paper Cartridge Replace Fuel Filter

/ J ' /SERVlCEOATES

If
If	I_s	if
	1_3

I_I_

1_4

IfIf

I_ If

1_1,2If

1_1,2I_

lI_'2

1_2

_1,2

If 2

_ If

v'.

1 - Change more often when operating under a heavy load or in high ambient temperatures.

2 - Service more often when operating in dirty or dusty conditions.

3 - Replace blades more often when mowing in sandy soil,

4 - Not required if equipped with maintenance-free battery.

5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum. Do not overtighten.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive

full value from the warranty, operator

must maintain tractor as instructed in this manual.

Some adjustments will need to be made

periodically to properly maintain your tractor.

At least once a season, check to see if you should make any of the adjustments

described in the Service and Adjustments section of this manual.

•At least once a year you should replace

the spark plug, clean or replace air filter, and check blades and belts for wear.

A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

1.Check engine oil level.

2.Check brake operation.

3.Check tire pressure.

4.Check operator presence and ROS systems for proper operation.

5.Check for loose fasteners.

LUBRICATION		CHART
@ SF		--	@ Spindle
Zerk			Zerk
@Front Wheel	,	_	@Front Wheel
Bearing			Bearing Zerk
Zerk
(gPEngine .
i
'			"_Gearshift
I	_	o_--	', Pivots
'	_	o_--	', Pivots

_SAE 30 or 10w30 Motor Oil

@General Purpose Grease

@Refer to Maintenance "ENGINE" Section

IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the

self-lubricating bearings. If you feel they must be lubricated, use only a dry, pow- dered graphite type lubricant sparingly.

ROS