MAINTENANCE
SCHEDULE
romp
Check Brake Operation
Check Tire Pressure
aT Check Operator Presence & ROS Systems
ACheck for Loose Fasteners
C ChecWReplace Mower Blades
T Lubrication Chart
0 Check Battery Level
RClean Battery and Terminals Clean Debris Off Steering Plate Check Transaxle Cooling
Check Mower Levelness Check
Check Engine Oil Level
Change Engine Oil (with oil filter)
Change Engine Oil (without oil filter)
NE Clean Air Filter
G Clean Air Screen
I Inspect Muffler/Spark Arrester
N Replace Oil Filter (If equipped)
BEFORE | EVERY | EVERY | EVERY | EVERY | EVERY | BEFORE |
EACH | 8 | 25 | 50 | 100 | SEASON | STORAGE |
USE | HOURS | HOURS | HOURS | HOURS |
|
|
v" | i/ |
v'4 |
|
v" | v" |
v' | v' |
| |
| V" |
| _1,2 |
_1,2 | v' |
| |
V"2 | v" |
|
EClean Engine Cooling Fins Replace Spark Plug
Replace Air Filter Paper Cartridge
v"2
v" v"
m |
| Filter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| v" |
| ||||
1 | - | Change | more | often | when | operating | under | a heavy | load or in high ambient | temperatures. | 3 | - | Replace | blades | more | often | when | mowing | in sandy | soil. | 5 - See Cleaning | in Maintenance | Section. | |
2 | - | Service | more | often | when | operating | in dirty | or dusty | conditions. |
| 4 | - | Not required | if | equipped | wffh | battery. |
|
|
|
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made pe- riodically to properly maintain your tractor. At least once a season, check to see if you should make any of the adjustments described in the Service and Adjustments section of this manual.
•At least once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear. A new spark plug and clean air filter assure proper
| LUBRICATION | CHART | |
(_ SF | Spindle | ||
Zerk |
| Zerk | |
(_ Front Wheel | Front Wheel | ||
Bearing zerk | |||
Bearing | zerk | ||
| |||
d> |
| Engine | |
|
| ||
Sector | Gear |
| |
Teeth |
| Mandrel | |
|
|
Zerks
(_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
BEFORE EACH USE
1.Check engine oil level.
2.Check brake operation.
3.Check tire pressure.
4.Check operator presence and ROS systems for proper operation.
5.Check for loose fasteners.
IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt
that will shorten the life of the
21