TROUBLESHOOTING =See appropriate section in manual unless directed
to a Sears Parts & Repair Center.
PROBLEMCAUSE
Loss of power 1. Rear of mower housing or blade dragging in grass.
2.Cutting too much grass.
3.Dirty air filter.
4.Buildup of grass, leaves, and trash under mower.
5.Too much oil in engine.
6.Walking speed too fast.
Poor cut - | 1. | Worn, | bent | or loose blade. | |
ui3eveR |
|
|
|
|
|
| 2. | Wheel | heights | uneven. | |
| 3. | Buildup of grass, leaves | |||
|
| and trash under | mower. | ||
Excessive | 1. | Worn, | bent | or loose blade. | |
vibration |
|
|
|
|
|
| 2. | Bent engine | crankshaft. | ||
CORRECTION
1.Raise cutting height.
2.Raise cutting height.
3.Clean/replace air filter.
4.Clean underside of mower housing.
5.Check oil level.
6.Cut at slower walking speed.
1.Replace blade. Tighten blade bolt.
2.Set all wheels at same height.
3.Clean underside of mower housing.
1.Replace blade. Tighten blade bolt.
2.Contact a Sears or other qualified service center.
Starter rope hard to pull
. Engine flywheel brake is on when control bar is released.
. Bent engine crankshaft.
3.Blade adapter broken.
4.Blade dragging in grass.
1.Depress control bar to upper handle before pulling the starter rope.
2.Contact a Sears or other qualified service center.
3.Replace blade adapter.
4.Move lawn mower to cut grass or to hard surface.
Grass | catcher | 1. | Cutting | height | too | low. | 1. | Raise | cutting | height. | ||
not filling | 2. | Lift on | blade | worn | off. | 2. | Replace blade. | |||||
(if so | equipped) | 3. | Catcher | not venting air. | 3. | Clean | grass | catcher. | ||||
Hard | to push | 1. | Grass |
| is too | high | or wheel | 1. | Raise | cutting | height. | |
|
|
| height |
| is too | low. |
|
|
|
|
| |
|
| 2. | Rear | of mower | housing or | 2. | Raise | rear of | mower housing | |||
|
|
| blade | dragging | in grass. |
| one (1) setting higher. | |||||
|
| 3. | Grass |
| catcher | too | ful!. | 3. | Empty | grass | catcher. | |
4.Handle height position not 4. Adjust handle height to suit. right for you.
Loss | of drive | 1. | Belt | wear. | 1. | Check/replace | drive | belt. | |
or slowing of | 2. | Belt | off | of pulley. | 2. | Check/reinstall | drive | belt. | |
drive | speed | 3. | Drive cable worn or broken. | 3. | Replace drive | cable. |
| ||
|
| 4. | "Loose" | drive control system. | 4. | Adjust drive control. |
| ||
NEED MORE HELP?
You'll find the answer and more on managemyhome.com - for free!
•Find this and all your other product manuals online.
•Get answers from our team of home experts.
•Get a personalized maintenance plan for your home.
•Find information and tools to help with home projects.
brought to you by Sears
21