Craftsman 917.37459 owner manual Custome Respons Bilities, Cleaning, AIR Rlter, Spark Plug

Page 14

CUSTOME RESPONS BILITIES

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SF or SG. Select the oil'sSAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

°F

-20°

0_

30_

32° 40_

60"

80"

100 °

TEMPERATURE RANGE ANTfCrPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after the first two hours of operation and every 25 hours thereafter or at least once a year if the lawn mower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Fig. 12)

NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

Remove engine oil cap; lay aside on a clean surface.

Tip lawn mower on its side and drain oil into a suitable container. Rock lawn mower back and forth to remove

any oil trapped inside of engine.

Wipe off any spilled oil on lawn mower and on side of engine.

•Fi!l engine with oit. Fiil only to the "FULL" line on the dipstick. DO NOT OVER FILL.

,Replace engine oil cap.

Reconnect spark plug wire to spark plug.

AIR RLTER

Your engine will not run properly and may be damaged by using a dirty air filter.

Repiace tlTe air filter every year, more often if you mow in very dusty, dirty conditions. Do not wash air filter.

TO CHANGE AiR FILTER (See Fig. 13)

Remove the air filter by turning counterclockwise to the stop and pull away from collar.

Remove filter from inside of cover.

Clean the inside of the cover and the collar to remove any dirt accumulation.

•Insert new filter into cover.

Put air filter cover and filter into collar aligning the tab with the slot.

Push in on cover and turn clockwise to tighten.

CONTAINER

RG. t2

TURN

CLOCKWISE

SLOT

AIR FILTE

TAB

TURN CLOCKWISE

TO TIGHTEN

 

 

AIR FILTER

 

COVER

 

FIG. 13

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Change your spark plug each year to make your engine star[ easier and run better. Set spark plug gap at .030 inch.

CLEANING

IMPORTANT: FOR BEST PERFORMANCE, KEEP MOWER HOUSING FREE OF BUILT-UP GRASS AND

TRASH. CLEAN UNDERSIDE OF MOWER HOUSING AFTER EACH USE.

•Turn lawn mower on its side. Make sure air filter and carburetor are up. Clean the underside of your lawn

mower by scraping to remove build-up of grass and trash.

Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

Keep finished surfaces and wheels free of al! gasoline, oil, etc.

We DO NOT recommend using a garden hose to clean lawn mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside of drive cover.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Sears Preparation Maintenance and StorageTraining OperationCustomer Respons Bilities Maintenance AgreementTED TWO Year Warranty on Craftsman Power Mower Contents Engine LawnaccessoriMaintenance Lawn Mower PerformanceTo Remove Lawn Mower from Carton AssemblyHOW to SET UP Your Lawn Mower Assembly To Assemble and Attach GrassMeets Cpsc Safety Requnrements OperationEngine Speed See Fig OperationNOW to USE Your Lawn Mower Engine Zone ControlMowing Tips Before Starting EngineTo Start Engine GAS See FigMulching Mowing Tips Responsibilities Service DatesCustomer General RecommendationsGear Case Customer Respons BilitiesTires Drve WheelsCustome Respons Bilities CleaningClean Under Drive Cover AIR RlterTo REMOVE/REPLACE Drive Belt Service AdjustmentsTo Adjust Cutting Height See FigErvice and Adjustments To Adjust Handle See Figs ThruEngine Speed CarburetorOther BatteryStorage Handle See FigKEY Part Gear Case Assembly Part NumberKEY Part Description Repair Parts KEY Part KEY Part DescriptionRepair Parts Descrmptjon Craftsman 22 Rotary Lawn Mower Model NumberKEY Power Propelled Lawn MOWER-. = Model no o374590 KEYCraftsman 4=CYCLE Engine REF Part NO. no REF Part NO. noPart Description 632681Electric Starter no Part DescriptionREF Part Description Rewind Starter no REF PartRewind Starter no Service Notes Service Notes Troubleshooting Points Problem Cause CorrectionPart Number If YOU Need Repair Service or PartsProduct Lawn Mower

917.37459 specifications

The Craftsman 917.37459 is a versatile and efficient riding lawn mower designed to make cutting your lawn a breeze. This model combines innovative technology with practical features, ensuring homeowners have the tools they need to maintain a beautiful yard with minimal effort.

One of the standout features of the Craftsman 917.37459 is its powerful engine. Equipped with a robust 19.5 HP Briggs & Stratton engine, this mower offers reliable performance for a variety of mowing conditions. The engine’s overhead valve design provides better fuel efficiency and longer engine life, enabling users to tackle larger lawns without the need for frequent refueling.

The cutting deck on the Craftsman 917.37459 is another highlight. It boasts a 42-inch cutting width, allowing for an effective and efficient mowing experience. This size is ideal for medium to large lawns, as it provides a balance between maneuverability and productivity. The cutting height can be easily adjusted from 1 to 4 inches, giving users the flexibility to achieve their desired grass length and ensuring a precise cut no matter the grass type.

The mower features a hydrostatic transmission, which provides smooth and effortless control, allowing users to change speeds without the need for shifting gears. This technology enhances the ease of operation, making it accessible for users of all experience levels. Additionally, the 917.37459 is designed with a tight turning radius, giving it superb maneuverability around landscaping, trees, and garden beds.

Ergonomics are also a key component of the Craftsman 917.37459. The high-back seat offers ample support for a comfortable ride, while the adjustable armrests allow users to customize their seating position for maximum comfort during long mowing sessions. The control layout is intuitive, placing essential functions within easy reach.

Durability is a top priority for the Craftsman brand, and the 917.37459 exemplifies this with its heavy-duty steel frame and deck. This construction ensures longevity and resistance against the rigors of outdoor use, making it a reliable choice for homeowners.

In conclusion, the Craftsman 917.37459 is a powerful riding mower characterized by its strong engine, versatile cutting deck, user-friendly hydrostatic transmission, and ergonomic design. This mower is engineered to provide homeowners with a reliable tool to maintain their lawns effortlessly, making it a smart investment for anyone looking to elevate their lawn care routine.
Top Page Image Contents