Craftsman 917.37459 Assembly, To Remove Lawn Mower from Carton, HOW to SET UP Your Lawn Mower

Page 6

ASSEMBLY

Read these instructions and this manual in its entirety

before you attempt to assemble or operate your new lawn mower. Your new lawn mower has been assembled at the

factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM CARTON

Remove loose parts included with mower.

Cut down two end corners of carton and lay end panel down flat,

Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.

Rolt tawn mower out of carton and check carton thor- oughly for additional loose parts.

HOW TO SET UP YOUR LAWN MOWER

TO UNFOLD HANDLE (See Fig. 1A)

IMPORTANT: UNFOLD HANDLES CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.

Raise handles until lower handle section locks into place in mowing position.

Raise upper handle section into place on lower handle,

remove protective padding and tighten both handle knobs.

Remove handie padding holding operator presence control bar to upper handle.

Your !awn mower handle can be adjusted for your mowing comfort. See "TO ADJUST HANDLE" in the Service and Adjustment section of this manual.

TO _NSTALL ATTACHMENTS (See Fig. 1B)

Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging:

Open rear door and remove mulcher plate. Store mulcher plate in a safe place.

You can now install catcher or optional clipping deflec- tor.

To return to mulching operation, install mulcher plate into discharge opening of mower. Be sure all tabs are

seated properly.

TO PREPARE BATTERY (See Fig. 2)

NOTE: Your battery must be charged before you can start your lawn mower.

Connect battery charger connector (male) to battery connector (female).

Piug battery charger into 110 volt A.C. outlet.

Leave battery charger connected for 24 hours before starting your engine for the first time.

After charging, connect engine connector to battery connector,

Your engine has an integral alternator for partial charging.

Connect your battery chargerto charge battery as required.

IMPORTANT: THE ENGINE ALTERNATOR WILL NOT CHARGE A DISCHARGED BATTERY.

At the end of the mowing season the battery should be

charged

for 48 hours to protect the battery during winter

storage.

6

CONTROLBAR

UPPERHANDLE

MOWING POSITION

LOWER HANDLE

FIG. 1A

SLOTS

MULCHER PLATE

TABS

 

FiG. 1B

CAUTION: Do not run your lawn mower without muicher plate in place or ap-

catcher in place. Never attempt to op- proved clipping deflector or grass erate the lawn mower with the rear door

removed or propped open,

gine connector

from the battery con-

I

n_cidental

starting

 

wh_

orstoringyour lawn

 

afterthea_son.

ENGINE

CONNECTOR

BATTERY

CHARGER

//BATTERY

jfCHARGER

CONNECTOR

BATTERY CONNECTOR(FEMALE)

(MALE)

FIG, 5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Sears Preparation Maintenance and StorageTraining OperationMaintenance Agreement TED TWO Year Warranty on Craftsman Power MowerCustomer Respons Bilities Contents Engine LawnaccessoriMaintenance Lawn Mower PerformanceAssembly HOW to SET UP Your Lawn MowerTo Remove Lawn Mower from Carton Assembly To Assemble and Attach GrassMeets Cpsc Safety Requnrements OperationEngine Speed See Fig OperationNOW to USE Your Lawn Mower Engine Zone ControlMowing Tips Before Starting EngineTo Start Engine GAS See FigMulching Mowing Tips Responsibilities Service DatesCustomer General RecommendationsGear Case Customer Respons BilitiesTires Drve WheelsCustome Respons Bilities CleaningClean Under Drive Cover AIR RlterTo REMOVE/REPLACE Drive Belt Service AdjustmentsTo Adjust Cutting Height See FigErvice and Adjustments To Adjust Handle See Figs ThruEngine Speed CarburetorOther BatteryStorage Handle See FigGear Case Assembly Part Number KEY Part DescriptionKEY Part Repair Parts KEY Part KEY Part DescriptionRepair Parts Craftsman 22 Rotary Lawn Mower Model Number KEYDescrmptjon Power Propelled Lawn MOWER-. = Model no o374590 KEYCraftsman 4=CYCLE Engine REF Part NO. no REF Part NO. noPart Description 632681Electric Starter no Part DescriptionRewind Starter no REF Part Rewind Starter noREF Part Description Service Notes Service Notes Troubleshooting Points Problem Cause CorrectionIf YOU Need Repair Service or Parts Product Lawn MowerPart Number

917.37459 specifications

The Craftsman 917.37459 is a versatile and efficient riding lawn mower designed to make cutting your lawn a breeze. This model combines innovative technology with practical features, ensuring homeowners have the tools they need to maintain a beautiful yard with minimal effort.

One of the standout features of the Craftsman 917.37459 is its powerful engine. Equipped with a robust 19.5 HP Briggs & Stratton engine, this mower offers reliable performance for a variety of mowing conditions. The engine’s overhead valve design provides better fuel efficiency and longer engine life, enabling users to tackle larger lawns without the need for frequent refueling.

The cutting deck on the Craftsman 917.37459 is another highlight. It boasts a 42-inch cutting width, allowing for an effective and efficient mowing experience. This size is ideal for medium to large lawns, as it provides a balance between maneuverability and productivity. The cutting height can be easily adjusted from 1 to 4 inches, giving users the flexibility to achieve their desired grass length and ensuring a precise cut no matter the grass type.

The mower features a hydrostatic transmission, which provides smooth and effortless control, allowing users to change speeds without the need for shifting gears. This technology enhances the ease of operation, making it accessible for users of all experience levels. Additionally, the 917.37459 is designed with a tight turning radius, giving it superb maneuverability around landscaping, trees, and garden beds.

Ergonomics are also a key component of the Craftsman 917.37459. The high-back seat offers ample support for a comfortable ride, while the adjustable armrests allow users to customize their seating position for maximum comfort during long mowing sessions. The control layout is intuitive, placing essential functions within easy reach.

Durability is a top priority for the Craftsman brand, and the 917.37459 exemplifies this with its heavy-duty steel frame and deck. This construction ensures longevity and resistance against the rigors of outdoor use, making it a reliable choice for homeowners.

In conclusion, the Craftsman 917.37459 is a powerful riding mower characterized by its strong engine, versatile cutting deck, user-friendly hydrostatic transmission, and ergonomic design. This mower is engineered to provide homeowners with a reliable tool to maintain their lawns effortlessly, making it a smart investment for anyone looking to elevate their lawn care routine.
Top Page Image Contents