Craftsman 917.376534 manual Before Starting Engine

Page 11

TO EMPTY GRASS CATCHER

1.Lift up on grass catcher using the frame handle.

2.Remove grass catcher with clippings from under lawn mower handle.

3.Empty clippings from bag using both frame handle and bag handle.

NOTE: Do not drag the bag when empty- ing; it will cause unnecessary wear.

Grass catcher frame

_i, CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

,A CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

•i, CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the unit. Slowly pour the entire container

down the oil fill spout into the engine. NOTE: Initial oi! fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE

Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh- ness.

Gasoline

filler cap

TO STOP ENGINE

•To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be present during the initial use of the product and should be considered normal.

NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required before starting.

•To start engine, hold operator presence control bar down to the handle and turn

the start key.

IMPORTANT: Do not crank engine more than five continous seconds between each

time you try to start. Wait 5 to 10 seconds between each attempt.

•To start engine using the rope starter, hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Craftsman Your Safety is Involved Yearfull Warranty on Craftsman Lawn MowerDo not General OperationIV. Safe Handling of Gasoline RJ19HX General ServiceLawn Mower Performance Lawn Mower MaintenancePosition To Remove Mower from CartonTo Unfold Handle MowingTo Assemble Grass Catcher To Prepare BatteryTo Install Attachments Know Your Lawn Mower Meets Cpsc Safety RequirementsHOW to USE Your Lawn Mower To Convert Mower Rear BaggingSide Discharging For Rear BaggingBefore Starting Engine Mowing Tips Mulching Mowing TipsBefore After Every General RecommendationsBefore Each USE LubricationDrive Wheels Lawn MowerEngine To Clean AIR FilterGrass Catcher Gear CaseSpark Plug CleaningClean Under Drive Cover MufflerRear Deflector Lawn Mower To Adjust Cutting HeightTo Adjust Handle To Remove Drive BeltForward for Storage Mowing Position CarburetorHandle Engine SpeedFuel System BatteryEngine OtherNeed More HELP? ProblemCause CorrectionSU Seguridad Esta Comprometida Sears, Roebuck and Co., Hoffman Estates, ILHacer OperacionIII. Ninos II. Operacion Sobre LAS CuestasRJ19HX SAEMantenimiento DE LA Segadora Rendimiento DE LA SegadoraPara Remover LA Segadora DE LA Caja DE Carton Como Preparar SU SegadoraPara Instalar LOS Accesorios Para Montar EL Recogedor DE CespedCumple CON LOS Requisitos DE Seguridad DE LA Cpsc Producto. Aprenda y comprenda sus significadosVelocidad DEL Motor Como Usar SU SegadoraPara Ensacamiento Trasero Para Convertir LA SegadoraSegadoras CON Descarga Trasera Segadoras CON Descarga LateralImportante Antes DE Hacer Arrancar EL MotorPara Parar EL Motor Consejos Para Segar Y ACOL- Char Onsejos Para SegarTabla DE Lubricacion Recomendaciones GeneralesAntes DE Cada USO LubricacionSegadora Motor Lubricacion Limpie Debajo DE LA Cubierta DE LA IMPULSI6N LimpiezaPara Ajustar EL Mango Para Ajustar LA Altura DE CorteDesviador Trasero Para Remover Correa DE ImpulsionSegadora MotorVelocidad DEL Motor CarburadorOtros ProblemaCausa Dificil de tirar ProblemaCraftsman Rotary Lawn Mower - Model Number Part KEY PartNO. no KEYCraftsman Rotary Lawn Mower - Model Number Craftsman Rotary Lawn Mower - Model Number 917o376534 Briggs & Stratton 4-CYCLE Engine ¸-lO 231 163 KEY Part Description Briggs & Stratton Cycle Engine307 690345 Screw Service Notes Service Notes Serifs

917.376534 specifications

The Craftsman 917.376534 is a versatile and efficient lawn tractor designed for homeowners seeking a reliable solution for maintaining their yards. With its robust construction and user-friendly features, this model is perfect for tackling various lawn care tasks, from mowing to mulching.

One of the standout features of the Craftsman 917.376534 is its powerful 26 HP Briggs & Stratton engine. This dependable engine provides ample power to navigate through thick grass and uneven terrain, ensuring a smooth mowing experience. The automatic transmission system allows for effortless speed adjustments, enabling users to move at their desired pace without the need for manual gear shifts.

The cutting deck of the Craftsman 917.376534 measures 54 inches, making it an ideal choice for mowing larger areas efficiently. The deck features a three-blade system, providing a clean and precise cut while also promoting healthy grass growth. Users can easily adjust the cutting height with a simple lever, allowing for customization according to grass type and height preferences.

Equipped with a dual-blade bagging system, this lawn tractor excels in grass collection, significantly reducing the time spent on lawn maintenance. The bagging system prevents clippings from cluttering the yard, making it easier to achieve a neat appearance. Additionally, the rear discharge feature allows grass clippings to be expelled back onto the lawn, acting as a natural fertilizer.

Comfort is paramount in the design of the Craftsman 917.376534. The plush, high-back seat provides excellent support during extended mowing sessions, while the steering wheel is ergonomically crafted for easy handling. The tractor’s compact design enables maneuverability in tight spaces, allowing users to mow with precision around flower beds and obstacles.

Safety features are also a priority in this model. The engine automatically shuts off if the operator leaves the seat, preventing accidental starts and promoting user safety. The headlights ensure visibility during early morning or late evening tasks, enhancing safety in low-light conditions.

Overall, the Craftsman 917.376534 combines power, efficiency, and comfort to deliver an outstanding lawn care experience. With modern technology and thoughtful design, this lawn tractor is well-suited for homeowners who seek to maintain their outdoor spaces with ease and confidence.
Top Page Image Contents