Parasound 2125 manual Problems and Remedies, Maintaining Your Model, Troubleshooting

Page 12

10PROBLEMS AND REMEDIES

Maintaining Your Model 2125

Your Parasound Model 2125 power amplifier requires no periodic maintenance other than the knowledge that you are bragging about it to your friends. It has no user-serviceable parts inside. To avoid the risk of electric shock, do not remove its top cover. The exterior can be cleaned with a soft cloth pre-moistened only with a few drops of water or glass cleaner.

Troubleshooting

No sound

•Check that AC is live.

•Is the unit on? Check the setting of the Auto Turn On switch.

•Doesn’t turn on with the Auto Turn On - Audio. Try the 12V trigger instead.

•Check that input cables and speaker wires are secure at both ends.

•Make sure the control preamp/receiver is switched to the correct input.

•If using Auto turn on, increase the sensitivity of the audio trigger.

•Is the Hi-Temp or Protect (or both) illuminated? Check for excessive temperature, short circuit- ed speaker wires, low impedance speaker load, and inadequate ventilation to remove heat.

Background Hum

•Move the Ground switch to Lift.

•Move audio cables and AC cords away from each other.

•Try different routes for the audio cables and AC cords.

•Make sure insulating shoulder washers are used if unit is rack mounted.

•Try reversing the direction of each other component’s AC plug, one by one.

Overheating

•Remove any external sources of heat.

•Increase ventilation around the Model 2125.

•Reset the Load Impedance switch to 2-3 Ohms.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model Important Safety Instructions Table of Contents Introduction Unpacking115v 230v AC Voltage Selector Switch Installation and Ventilation RequirementsConnection Precautions Rear Panel Connections and ControlsJacks Loop JacksHigh Pass Filter Switch Speaker ConnectionsBridging Switch Stereo Mono Load Impedance SwitchCorrect Speaker Polarity is Important Mono OperationAuto Turn On Switch Automatic Turn On and OffGround Switch AC Power Connections and AC GroundingFront Panel Buttons and Display Problems and Remedies TroubleshootingMaintaining Your Model Before You Return Any Unit to Parasound for Service If YOU Require AssistanceParasound Model 2125 Specifications Connection and Setup Notes Rev

2125 specifications

The Parasound 2125 is a high-performance power amplifier that has carved out a niche for itself among audiophiles and home theater enthusiasts. Renowned for its impressive sound quality and robust design, it serves as a reliable option for those seeking to drive their loudspeakers with precision and power.

One of the standout features of the Parasound 2125 is its high current capability, which ensures that the amplifier can deliver ample power even to low-impedance speakers. With a power output of 125 watts per channel into 8 ohms and 220 watts per channel into 4 ohms, it provides headroom for dynamic peaks in music and movie soundtracks. This makes the 2125 an excellent choice for a wide variety of speaker types and listening environments.

The design of the Parasound 2125 is characterized by its Class AB operation, which combines the efficiency of Class A and the power of Class B. This results in an amplifier that can reproduce audio with minimal distortion and noise, thus enhancing the listening experience. The unit features a toroidal transformer, known for its low electromagnetic interference and high efficiency, contributing to the 2125's clean and detailed sound signature.

In addition to its powerful output, the Parasound 2125 comes equipped with a range of advanced technologies. For example, its multi-layered, aluminum chassis not only adds to its aesthetic appeal but also reduces unwanted resonance and vibration, further preserving audio fidelity. The amplifier features a comprehensive protection circuit that safeguards against overheating and short circuits, ensuring longevity and reliability.

The 2125 also includes flexible connectivity options, with both balanced XLR and unbalanced RCA inputs, allowing users to tailor their audio setup according to their preferences. The amplifier's rear panel includes gold-plated binding posts that facilitate secure and efficient speaker connections.

Overall, the Parasound 2125 stands out as a formidable power amplifier that boasts impressive specifications and features designed to appeal to discerning listeners. Its combination of powerful output, sophisticated design, and high-quality components make it an ideal solution for those looking to enhance their audio systems, whether for music playback or home theater applications. With the Parasound 2125, users can expect an immersive listening experience that brings their favorite sounds to life.
Top Page Image Contents