Other, Fuel System, Engine OIL, Cylinder

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent

gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation

of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio

found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the car-

buretor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to protect it from dust and dirt.

•Cover your unit with a suitable protec- tive cover that does not retain moisture.

Do not use plastic. Plastic cannot breathe, which allows condensation to

form and will cause your unit to rust. IMPORTANT: Never cover mower while

engine and exhaust areas are still warm.

ACAUTION: Never store the lawn

mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TROUBLESHOOTING =See appropriate section in manual unless directed

to a Sears Parts & Repair Center.

PROBLEM

CAUSE

CORRECTION


Does not start	.	Dirty	air		filter.
	2.	Out	of fue!.
	3.	Stale		fuel.
	4.	Water		in fuel.
	5.	Spark		plug wire is
		disconnected.
	6.	Bad spark					plug.
	7.	Loose		blade				or broken
		blade		adapter.
	8.	Control			bar		in released
		position.
	9.	Control			bar		defective.
	10. Fuel valve lever (if so
		equipped)				in OFF position.
	11.	Weak		battery				(if equipped).
	12. Disconnected							battery
		connector				(if equipped).
	13. Blown fuse (if equipped).

. Clean/replace air filter.

2.Fill fuel tank.

3.Empty fuel tank and refill tank with fresh, clean gasoline.

4.Empty fuel tank and refill tank with fresh, clean gasoline.

5.Connect wire to plug.

6.Replace spark plug.

7.Tighten blade bolt or replace blade adapter.

8.Depress control bar to handle.

9.Replace control bar.

10.Turn fuel valve lever to the ON position.

11.Charge battery.

12.Connect battery to engine.

13.Replace fuse.

917.376233 specifications

The Craftsman 917.376233 is a riding lawn mower specifically designed for the homeowner seeking a blend of durability, performance, and comfort. This model stands out in the Craftsman line-up, providing a robust set of features that cater to a variety of lawn care needs.

One of the key features of the Craftsman 917.376233 is its powerful engine. Equipped with a 19 horsepower Briggs & Stratton engine, this mower offers reliable power for tackling larger lawns and rough terrain. The engine is designed for optimal performance, ensuring that the mower operates smoothly and efficiently during operation.

The mower features a 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting capacity. This width allows for efficient mowing in medium to large yards while still being able to navigate tight spaces, such as flower beds and pathways. The adjustable cutting height also provides users with the flexibility to achieve the desired grass length, with multiple positions available to suit different lawn conditions.

In addition to its performance features, the Craftsman 917.376233 incorporates advanced technologies to enhance user experience. The manual transmission with a seven-speed gear shift allows operators to easily adjust their speed based on the lawn’s terrain. This provides better control and precision while mowing.

Comfort is also a significant focus in the design of this model. The high-back seat and ergonomic steering wheel ensure that users can operate the mower for extended periods without discomfort. The convenient foot-pedal design allows for easy speed adjustments, while the easy-access controls promote a user-friendly experience.

The mower is designed with durability in mind. Its heavy-duty steel frame and cutting deck construction ensure that it can withstand the rigors of regular use, making it a long-lasting investment for homeowners. Coupled with a reliable maintenance schedule, the Craftsman 917.376233 is built to provide years of dependable service.

Overall, the Craftsman 917.376233 combines power, versatility, and user comfort, making it an excellent choice for homeowners looking to maintain the beauty of their lawns. Its thoughtful features and solid construction make it a model that stands out in the competitive landscape of riding lawn mowers.