Craftsman 917.37181 owner manual Before Starting Engine, ADD Gasoline, Add Oil, To Stop Engine

Page 10

TO EMPTY GRASS CATCHER

1.Open round door of discharge chute to move starter rope out and away from grass catcher.

\X Front

OPEN

Round

Starter

door

rope

2.Remove grass catcher with clippings

from lawn mower using both front and rear handles.

3.Empty clippings from grass catcher using both rear handle and strap. The

weight of the grass will open the door.

4.Snap door shut over frame before installing grass catcher on mower.

NOTE: Do not drag the grass catcher when emptying; it will cause unnecessary wear.

handle

\

3.You recieve a container of oil with the unit. Slowly pour the entire container down the oil fill spout into the engine.

4.Insert and tighten oil fill cap/dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

Change the oil after every 25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE

Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be

used within 30 days to assure fuel fresh- ness.

A CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

A CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for

additional information. Never use engine or carburetor cleaner products in the fuel

Strap

\

\

tank or permanent damage may occur.

Oil fill cap /

Gasoline

di

filler cap

\\

Front handle

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

• i, CAUTION: DO NOT overfill engine with oil, or it will smoke on startup.

1.Be sure lawnmower is level.

2.Remove oil fill cap/dipstick from oil fill spout.

Upper

mark mark

TO STOP ENGINE

To stop engine, release operator pres- ence control bar. Wait until blade and

all moving parts have stopped and turn fuel valve to OFF position if you do not

10 intend to restart the engine soon.

Image 10
Contents Crrftsmiin ALook Year Full Warranty on Craftsman Lawn MowerSears, Roebuck and Co., Hoffman Estates, IL AwarningDo not General OperationII. Slope Operation III. ChildrenAPI SG-SL SAE NGK BPR6ESLawn Mower Maintenance Lawn Mower PerformanceTo Remove Lawn Mower from HOW to SET UP Your Lawn MowerTo Install Attachments To Unfold HandleMeets Cpsc Safety Requirements Know Your Lawn MowerEngine Speed Drive Control AdjustmentTo Adjust Cutting Height Engine Zone ControlFor Rear Bagging Side DischargingFor Side Discharging ADD OIL Before Starting EngineADD Gasoline To Stop EngineMowing Tips OFFMulching Mowing Tips General Recommendations Lubrication ChartSpray lubricant See Engine in Maintenance section Before Each USEDrive Wheels Lawn MowerTires Blade CareTo Change Engine OIL To Clean AIR FilterAIR Filter Muffler CleaningClean Under Drive Cover Spark PlugTo Remove Drive Belt Lawn Mower To Adjust Cutting HeightRear Deflector PivotEngine To Adjust HandleTo Replace Drive Belt CarburetorFold Lawn MowerHandle StorageProblem Does not startProblem CauseGarantia Programa de Mantenimiento Reglas de Seguridad No Hacer Operacion II. Operacion Sobre LAS CuestasHacer III. NinosNGK Rendimiento DE LA Segadora Acuerdos de Protecci6n para la Reparaci6nMantenimiento DE LA Segadora Como Preparar SU Segadora Para Desdoblar EL Mango Para Remover LA Segadora DELA Caja DE Carton Para Instalar LOS AccesoriosFamiliaricese CON SU Segadora Cumple CON LOS Requisitos DE Seguridad DE LA CpscLA Segadora SU SegadoraDEL Motor DEL MandoPara Ensacamiento Trasero Segadoras CON Descarga LateralPara Descarga Lateral Motor Agregue Aceite AbiertoAntes DE Hacer Arrancar EL ImportanteConsejos Para Segar Para Parar EL MotorPara Hacer Arrancar EL Motor Consejos Para Segar Y AcolcharTabla DE Lubricacion Recomendaciones GeneralesAntes DE Cada USO @BisagraRecogedor DE Cesped LlantasRuedas DE Impulsion Caja DE EngranajesPara Cambiar EL Aceite DEL Motor MotorFiltro DE Aire Limpie Debajo DE LA Cubierta DE LA BujjaLimpieza ImpulsionSegadora Para Ajustar LA Altura DE Corte Para Remover LA Correa DE IMPUL- SionPara Ajustar EL Mango Para MangoDoblar Hacia Adelante AlmacenarCorreccion ProblemaCausa No arrancaProblema Craftsman Rotary Lawn MOWER- Model Number Craftsman Rotary Lawn Mower - Model Number 917.37181032jll Craftsman Rotary Lawn Mower Model Number 169911 Bearing Ball WheelKEY Part Description Service Notes Honda 4-CYCLE Engine Model Number GCV160-AS3A Labels KEY Part NO, NO, Description Flywheel Recoil Starter KEY Part NO, NO. Description Piston Connecting ROD J Honda 4-CYCLE Engine Cylinder Barrel KEY Part NO, NO, DescriptionYour Home

917.37181 specifications

The Craftsman 917.37181 is a high-performance riding lawn mower designed for both residential and commercial use. This versatile machine combines power, precision, and user-friendly features, making it a worthy addition to any outdoor maintenance arsenal. Its robust build quality and innovative technologies ensure efficient cutting, reliable operation, and ease of use, appealing to both novice and seasoned lawn care enthusiasts.

One of the standout features of the Craftsman 917.37181 is its powerful engine. It is equipped with a dependable 19 horsepower Honda engine that provides ample power for tackling tough mowing conditions. The engine’s performance is complemented by its electric start system, which allows for effortless ignition with the turn of a key, eliminating the hassle associated with traditional pull-string models. This feature enhances user convenience, particularly in cold weather or when faced with challenging terrain.

The mower is designed with a 42-inch cutting deck, which strikes a perfect balance between maneuverability and cutting efficiency. This width allows it to easily navigate through narrow pathways while still covering a significant mowing area. The cutting height is adjustable, with several positions available, enabling users to customize their mowing experience based on grass type or weather conditions. This flexibility ensures a clean, even cut every time.

Another noteworthy characteristic of the Craftsman 917.37181 is its innovative transmission system. The hydrostatic transmission provides smooth and seamless speed control, allowing users to operate the mower easily without constant gear shifting. This results in a more enjoyable mowing experience, particularly over uneven or sloped terrain.

Ergonomics have also been prioritized in the design of this riding mower. The spacious, high-back seat offers excellent support, allowing users to remain comfortable during prolonged mowing sessions. Additionally, the mower features convenient mid-back support and accessible controls, making it simple for anyone to operate.

In terms of maintenance, the Craftsman 917.37181 is designed for ease of care. The deck features a washout port that allows for quick cleaning after use, helping to prolong the life of the mower and maintain its performance. The fuel tank is also conveniently placed for easy refueling, ensuring that users can spend more time mowing and less time on maintenance tasks.

Overall, the Craftsman 917.37181 stands out as an exceptional riding lawn mower that combines power, versatility, and user-friendly features. Whether for residential lawns or commercial properties, this model offers reliable performance, ensuring a well-manicured lawn with minimal effort. Its robust design and advanced technologies make it a valuable investment for anyone looking to enhance their lawn care routine.