Craftsman 917.289243 manual Tractor, Brake Operation, Tires, Check Operator Presence System

Page 17

TRACTOR

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments

section of this manual).

TIRES

•Maintain proper air pressure in all tires (See the sides of tires for proper PSI).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause

tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS)

Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the

brake pedal is fully depressed, and the attachment clutch control is in the disen-

gaged position.

CHECK OPERATOR PRESENCE SYSTEM

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the at- tachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never oper- ate unless the operator is in the seat.

CHECK REVERSE OPERATION (ROS) SYSTEM

•When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should shut off the engine.

•When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be sharp. Replace worn, bent or damaged blades.

_, CAUTION: Use only a replacement

blade approved by the manufacturer of your tractor. Using a blade not approved by the

manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new blade with stamped "GRASS SIDE" facing the ground.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

iMPORTANT: Special blade bolt is heat treated.

 

Star

Center Hole

\

Blade Bolt

Mandrel

(Special) "----._ _

Assembly

Blade

 

ROS "ON" Position Engine "ON" Position (Normal Operating)

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents SEARS, Roebuckand CO., Hoffman ESTATES, IL 60179 U.S.A LAW TractoTWO Years on RiDiNG Equipment Craftsman Full WarrantyGeneral Operation Safe Handling of Gasoline ServiceGeneral Service Repair Protection Product SpecificationsTo Adjust Seat Tools Required for AssemblyCheck Battery To Remove Tractor from CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake System@@@ Know Your Tractor Stopping HOW to USE Your TractorTo SET Parking Brake To Adjust Gauge Wheels To Adjust Mower Cutting HeightTo Move Forward Backward To Operate MowerReverse Operation System ROS To TransportTransmission Engaged Transmission Disengaged To Start Engine Before Starting the EngineAutomatic Transmission Warm UP Check Engine OIL LevelNever engage or disengage Purge TransmissionChart MaintenanceSchedule LubricationBrake Operation TractorTires Operator Presence System and Reverse Operation System ROSEngine Transaxle Pump FluidMuffler Deck Washout Port CleaningMovable parts To Remove Mower To Install Mower03042tex FRONT-TO-BACK Adjustment Visual SIDE-TO-SIDE AdjustmentPrecision SIDE-TO-SIDE Adjustment To Level MowerTo Replace Mower Blade Drive Belt Belt InstallationBelt Removal To Replace Motion Drive BeltTo Start Engine with Weak Battery Transaxle Motion Control Lever Neutral AdjustmentTo Remove Wheel for Repairs To Attach Jumper CablesReplacing Battery To Remove Hood & Grill AssemblyCylinders Fuel SystemEngine OIL Will not start ProblemHard to start Engine will not turn over Cause CorrectionWill not Start Problem CauseDischarge Headlights not working If so equipped ProblemWhen Turning Battery Will NotDrive Engine BackfiresOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe OperationDOS Aiios Para EL Equipo Tractor Sears, Roebuck and Co., Hoffman Estates, ILDvertencia Funcionamiento GeneralAdvertencia IadvertenciaOperaciones DE Servicio Generales III, NinosIV. Remolque Page Producto Especificaciones DELResponsabilidades DEL Cliente Servicio DE Instalacion SearsDesempaque LA Caja DE Carton Herramientas Necesarias Para EL MontajeLA Caja DE Carton Revjsion DE LA Nivelacion DEL Conjunto Revision DE LA Presion DE LAS LlantasRevision DEL Sistema DE Frenos Jlista DE Revision@@@ Istema DE Funcionamiento Hacia Familiaricese CON SU TractorSU Tractor Parada Como Usar SU TractorMiento LA Segadora Para Operar EN Cerros Usar EL Sistema DE Funcionamiento ATR,SPara Transportar Transmision Enganchada Transmision DesenganchadaAgreguegasolina Consejos Para Segar Purgar LA TransmisionAntes DE Cada USO Tabla DE LubricacionRecomendaciones Generales VI= Rifiez Sistema Func Ionam Iento AT R/,S ROS TractorLlantas Transeje MotorCorreas Para Cambiar EL Aceite DEL MotorSilenciador BUJiASLimpieza Puerto DE Lavado DE LA Cubierta SuperiorInstale LA Segadora DE CespedPara Desmontar LA Cortadora 03042tex Regulacion Visual DE Lado a Lado Para Nivelar LA SegadoraAjuste DE Delante a ATR,S Regulacion DE LA Precision DE LadoRemocion DE LA Correa Paracambiarla Correa DE Impulsion DE LA Cuchilla SegadoraInstalacion DE LA Correa Montaje DE LA CorreaPara ADJ Untar LOS CAB LES D E EM Palm E MEC.&NICOPara Cambiar EL Fusible Reemplazar LA BateriaPara Remover EL Conjunto DEL Capota Y DEL Enrejado Para Cambiar LA Bombilla DE LA LUZ DelanteraSistema DE Combustible OtrosAceite DEL Motor CilindrosCausa IDENTIFICACI6N DE ProblemasVaciar et estanque Identificacion DE ProblemasYea la secci6n apropiada en el manual a menos que Page 15GRADOS MAX Operacion SeguraCuesta Abajo Y no Atraviese EL Cerro Your Home Needmore

917.289243 specifications

The Craftsman 917.289243 is a versatile and robust lawn tractor designed to make yard care an easier and more efficient task. This model embodies the innovation and quality that Craftsman is known for, featuring various technologies and characteristics that enhance user experience and performance.

One of the standout features of the 917.289243 is its powerful engine. It is equipped with a reliable 21.5 HP Briggs & Stratton engine, which provides ample power to tackle demanding mowing jobs. The engine is complemented by a hydrostatic transmission, allowing for smooth speed control and effortless driving across varying terrains without the need for manual shifting.

The cutting deck of the Craftsman 917.289243 measures 42 inches, making it ideal for medium to large-sized lawns. With this cutting width, users can efficiently mow larger areas in less time. The deck also features a deck wash system, which simplifies maintenance by allowing users to easily clean the underside of the mower, ensuring optimal performance and longevity.

Maneuverability is another key characteristic of the Craftsman 917.289243. With a tight turning radius, this tractor can navigate around obstacles with ease, making it perfect for lawns with flowerbeds, trees, or other features. The comfortable seating and ergonomically designed controls further enhance the user experience, allowing for extended periods of use without discomfort.

One of the modern technologies integrated into this model is the automatic choke system, which simplifies starting in any weather condition. Additionally, the tractor's durable construction ensures that it can withstand the rigors of regular outdoor use, featuring a sturdy frame and durable components designed for longevity.

For those looking for versatility, the Craftsman 917.289243 also supports various attachments, such as baggers, mulchers, and snow plows, expanding its functionality throughout the year. This makes it not just a lawn mower, but a year-round outdoor tool that can adapt to different seasons and tasks.

In summary, the Craftsman 917.289243 lawn tractor combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners who prioritize quality and performance in their lawn care equipment. With its reliable engine, versatile cutting options, and ease of use, this lawn tractor stands out as a premier option for those looking to maintain their lawns with precision and ease.
Top Page Image Contents