Craftsman 917.289243 manual Movable parts, Deck Washout Port, Cleaning

Page 20

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Clean debris from steering plate.

Debris can restrict clutch/brake pedal

shaft movement, causing belt slip and loss of drive.

Nozzle

 

Ada

Washout Port

 

A CAUTION: Avoid all pinch points and

movable parts

Clutch/brake pedal

Clean top side

Steering

Steering System, Dash,

Pinch I

,

i CAUTION:i

Fender and Mower Not Shown

PointsJ

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automo- tive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor

unless the engine and transmission are covered to keep water out. Water in engine

or transmission will shorten the useful life of

your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

DECK WASHOUT PORT

Your tractor's deck is equipped with a wash- out port on its surface as part of its deck wash system. It should be utilized after each use.

1.Drive the tractor to a level, clear spot on your lawn, near enough to a water

spigot for your garden hose to reach. iMPORTANT: Make certain the tractor's

discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.

2.Make sure the attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine.

3.Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose.

4.Pull back the lock collar of the nozzle adapter and push the adapter onto the

deck washout port at the left end of the mower deck. Release the lock collar to

lock the adapter on the nozzle.

iMPORTANT: Tug hose ensuring connec- tion is secure.

5.Turn the water on.

6.While sitting in the operator's position on thetractor, re-start the engine and place the throttle lever in the Fast",,_" position.

iMPORTANT: Recheck the area making certain the area is clear.

7.Movethetractor's attachment clutch con-

troltothe"Engaged" position. Remain in the operator's position with the cutting deck engaged until the deck is cleaned.

8.Move the tractor's attachment clutch

control to the "DISENGAGED" posi- tion. Turn the ignition key to the STOP

position to turn the tractor's engine off. Turn the water off.

9.Pull back the lock collar of the nozzle

adapter to disconnect the adapter from the nozzle washout port.

10.Move the tractorto a dry area, preferably a concrete or paved area. Place the at- tachment clutch control in the "Engaged" position to remove excess water and to

,_ help dry before putting the tractor away. WARNING: A broken or missing washout fitting could expose you or others to thrown

objects from contact with the blade.

•Replace broken or missing washout fitting immediately, prior to using mower again.

•Plug any holes in mower with bolts and Iocknuts.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents LAW Tracto SEARS, Roebuckand CO., Hoffman ESTATES, IL 60179 U.S.ACraftsman Full Warranty TWO Years on RiDiNG EquipmentGeneral Operation Service Safe Handling of GasolineGeneral Service Product Specifications Repair ProtectionTools Required for Assembly To Adjust SeatCheck Battery To Remove Tractor from CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake System@@@ Know Your Tractor Stopping HOW to USE Your TractorTo SET Parking Brake To Adjust Mower Cutting Height To Adjust Gauge WheelsTo Move Forward Backward To Operate MowerReverse Operation System ROS To TransportTransmission Engaged Transmission Disengaged Before Starting the Engine To Start EngineAutomatic Transmission Warm UP Check Engine OIL LevelPurge Transmission Never engage or disengageMaintenance ChartSchedule LubricationTractor Brake OperationTires Operator Presence System and Reverse Operation System ROSTransaxle Pump Fluid EngineMuffler Deck Washout Port CleaningMovable parts To Install Mower To Remove Mower03042tex Visual SIDE-TO-SIDE Adjustment FRONT-TO-BACK AdjustmentPrecision SIDE-TO-SIDE Adjustment To Level MowerBelt Installation To Replace Mower Blade Drive BeltBelt Removal To Replace Motion Drive BeltTransaxle Motion Control Lever Neutral Adjustment To Start Engine with Weak BatteryTo Remove Wheel for Repairs To Attach Jumper CablesTo Remove Hood & Grill Assembly Replacing BatteryCylinders Fuel SystemEngine OIL Problem Will not startHard to start Engine will not turn over Cause CorrectionProblem Cause Will not StartProblem Discharge Headlights not working If so equippedBattery Will Not When TurningDrive Engine BackfiresSuggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXSears, Roebuck and Co., Hoffman Estates, IL DOS Aiios Para EL Equipo TractorFuncionamiento General DvertenciaAdvertencia IadvertenciaOperaciones DE Servicio Generales III, NinosIV. Remolque Page Especificaciones DEL ProductoResponsabilidades DEL Cliente Servicio DE Instalacion SearsDesempaque LA Caja DE Carton Herramientas Necesarias Para EL MontajeLA Caja DE Carton Revision DE LA Presion DE LAS Llantas Revjsion DE LA Nivelacion DEL ConjuntoRevision DEL Sistema DE Frenos Jlista DE Revision@@@ Istema DE Funcionamiento Hacia Familiaricese CON SU TractorSU Tractor Parada Como Usar SU TractorMiento LA Segadora Usar EL Sistema DE Funcionamiento ATR,S Para Operar EN CerrosPara Transportar Transmision Enganchada Transmision DesenganchadaAgreguegasolina Purgar LA Transmision Consejos Para SegarAntes DE Cada USO Tabla DE LubricacionRecomendaciones Generales VI= Rifiez Sistema Func Ionam Iento AT R/,S ROS TractorLlantas Motor TransejeCorreas Para Cambiar EL Aceite DEL MotorSilenciador BUJiASLimpieza Superior Puerto DE Lavado DE LA CubiertaInstale LA Segadora DE CespedPara Desmontar LA Cortadora 03042tex Para Nivelar LA Segadora Regulacion Visual DE Lado a LadoAjuste DE Delante a ATR,S Regulacion DE LA Precision DE LadoParacambiarla Correa DE Impulsion DE LA Cuchilla Segadora Remocion DE LA CorreaInstalacion DE LA Correa Montaje DE LA CorreaMEC.&NICO Para ADJ Untar LOS CAB LES D E EM Palm EReemplazar LA Bateria Para Cambiar EL FusiblePara Remover EL Conjunto DEL Capota Y DEL Enrejado Para Cambiar LA Bombilla DE LA LUZ DelanteraOtros Sistema DE CombustibleAceite DEL Motor CilindrosIDENTIFICACI6N DE Problemas CausaIdentificacion DE Problemas Vaciar et estanqueYea la secci6n apropiada en el manual a menos que Page 15GRADOS MAX Operacion SeguraCuesta Abajo Y no Atraviese EL Cerro Needmore Your Home

917.289243 specifications

The Craftsman 917.289243 is a versatile and robust lawn tractor designed to make yard care an easier and more efficient task. This model embodies the innovation and quality that Craftsman is known for, featuring various technologies and characteristics that enhance user experience and performance.

One of the standout features of the 917.289243 is its powerful engine. It is equipped with a reliable 21.5 HP Briggs & Stratton engine, which provides ample power to tackle demanding mowing jobs. The engine is complemented by a hydrostatic transmission, allowing for smooth speed control and effortless driving across varying terrains without the need for manual shifting.

The cutting deck of the Craftsman 917.289243 measures 42 inches, making it ideal for medium to large-sized lawns. With this cutting width, users can efficiently mow larger areas in less time. The deck also features a deck wash system, which simplifies maintenance by allowing users to easily clean the underside of the mower, ensuring optimal performance and longevity.

Maneuverability is another key characteristic of the Craftsman 917.289243. With a tight turning radius, this tractor can navigate around obstacles with ease, making it perfect for lawns with flowerbeds, trees, or other features. The comfortable seating and ergonomically designed controls further enhance the user experience, allowing for extended periods of use without discomfort.

One of the modern technologies integrated into this model is the automatic choke system, which simplifies starting in any weather condition. Additionally, the tractor's durable construction ensures that it can withstand the rigors of regular outdoor use, featuring a sturdy frame and durable components designed for longevity.

For those looking for versatility, the Craftsman 917.289243 also supports various attachments, such as baggers, mulchers, and snow plows, expanding its functionality throughout the year. This makes it not just a lawn mower, but a year-round outdoor tool that can adapt to different seasons and tasks.

In summary, the Craftsman 917.289243 lawn tractor combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners who prioritize quality and performance in their lawn care equipment. With its reliable engine, versatile cutting options, and ease of use, this lawn tractor stands out as a premier option for those looking to maintain their lawns with precision and ease.
Top Page Image Contents