Craftsman 917.374361 owner manual Cleaning, Muffler, Clean Under Drive Cover, Spark Plug

Page 16

Back plate

Lip

Cartridge

Slot

Cover

Covertab

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the "PRODUCT SPECIFICATIONS" section of this manual.

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass and

trash. Clean the underside of your mower after each use.

,_CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean the underside of your lawn mower

by scraping to remove build-up of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the

electrical system, muffler, air filter and carburetor are covered to keep water out. Water in engine can result in short- ened engine life.

WATER WASHOUT FEATURE

Your lawn mower is equipped with a fitting that allows quick and easy cleaning of the underside of the housing. To use this feature, proceed as follows:

1.Move lawn mower to an area of cut grass or another hard surface.

NOTE: Water, grass and other debris will drain from beneath the mower housing during the washout process.

2.Remove grass catcher and discharge chute assembly from lawn mower.

3.Close mulcher door (if equipped).

4.Connect a garden hose to the fitting where shown.

IMPORTANT: Be sure the garden hose is not routed under the lawn mower housing or entangled in the wheels.

5. Turn on water supply and check for leaks at the fitting.

If no leaks are present, start engine (as described in the Operation section of this manual) and let engine run until the underside of the lawn mower is clean.

•ll WARNING: Do not engage the drive system during the washout process.

6.Shut off the engine.

7.Shut off water supply and remove

hose from fitting.

CAUTION: Do not remove hose from

fitting while engine is running. Water in engine can result in shortened engine life.

8.Start engine (as described in the Op- eration section of this manual) and let

engine run for a full minute to remove excess water from mower.

Hose

Fitting

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside of drive cover.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Craftsman Yearfull Warranty on Craftsman Lawn Mower Your Safety is InvolvedIV. Safe Handling of Gasoline General OperationDo not General Service RJ19HXLawn Mower Maintenance Lawn Mower PerformanceTo Remove Mower from Carton To Unfold HandleMowing PositionTo Install Attachments To Prepare BatteryTo Assemble Grass Catcher Meets Cpsc Safety Requirements Know Your Lawn MowerEngine Speed Rear Bagging Side DischargingFor Rear Bagging To Convert MowerBefore Starting Engine Mulching Mowing Tips Mowing TipsGeneral Recommendations Before Each USELubrication Before After EveryLawn Mower Drive WheelsTo Clean AIR Filter Grass CatcherGear Case Engine LubricationCleaning Clean Under Drive CoverWater Washout Feature MufflerTo Adjust Handle Rear DeflectorTo Remove Drive Belt To Replace Drive BeltCarburetor HandleEngine Speed Fold Forward for Storage Mowing PositionBattery Problem Cause CorrectionOther Fuel SystemProblem CauseSears, Roebuck and Co., Hoffman Estates, IL SU Seguridad Esta ComprometidaOperacion III. NinosII. Operacion Sobre LAS Cuestas HacerSAE RJ19HXRendimiento DE LA Segadora Mantenimiento DE LA SegadoraComo Preparar SU Segadora Para Remover LA Segadora DE LA Caja DE CartonPara Montar EL Recogedor DE Para Instalar LOS AccesoriosFamiliaricese CON SU Segadora Producto. Aprenda y comprenda sus significadosComo Usar SU Segadora Control DE LA IMPULSI6NAjuste DEL Mando ATRA.SPARA Bajar Palancahacia EL CORTAC¢SPEDPara Convertir LA Segadora Segadoras CON Descarga TraseraSegadoras CON Descarga Lateral Para Ensacamiento TraseroAntes DE Hacer Arrancar EL Motor Para Parar EL MotorOnsejos Para Segar Consejos Para Segar Y ACOL- CharRecomendaciones Generales Antes DE Cada USOSegadora LlantasRuedas DE IMPULSI6N Cuidado DE LA CuchillaRecogedor DE Cosped Caja DE EngranajesPara Cambiar EL Aceite DEL Motor Filtro DE AireDerrubio DEL Agua LimpiezaLimpie Debajo DE LA Cubierta DE LA Impulsion Segadora LA Altura DE CorteDesviador Trasero Para Remover Correa DE ImpulsionVelocidad DEL Motor CarburadorProblema Causa MotorAceite DEL Motor CilindroCausa CorreccionCraftsman Rotary Lawn Mower - Model Number 917.37436t KEY Part CraftsmanDescription 1833 Craftsman Rotary Lawn Mower - Model Number 917o37436t KEY Part DescriptionBriggs & Stratton 4-CYCLE Engine Model Number 128T05-1268=B1 564 883 Briggs & Stratton Cycle Engine Briggs & STRATTON4-CYCLE Engine Service Notes Service Notes Serifs

917.374361 specifications

The Craftsman 917.374361 is a powerful and versatile riding lawn mower that has gained a loyal following among homeowners and landscapers alike. Known for its robust construction and efficient performance, this model boasts several features that cater to a variety of lawn care needs.

At the heart of the Craftsman 917.374361 is a reliable 17.5 horsepower, Briggs & Stratton engine. This engine is designed to deliver strong, consistent power, making it capable of tackling even the toughest mowing tasks. The automatic transmission enables smooth operation, allowing users to easily adjust their speed according to the terrain and conditions. With a cutting width of 42 inches, this mower can efficiently cover large areas, reducing the time spent on lawn maintenance.

One of the standout features of the Craftsman 917.374361 is its adjustable cutting height. With multiple positions to choose from, users can customize the grass height to suit their lawn's specific needs. This capability helps ensure a healthy lawn, as it promotes better growth and reduces the likelihood of scalping or damaging the grass.

The mower also incorporates a tight turning radius, which enhances maneuverability around flower beds, trees, and other obstacles in the yard. This feature is particularly beneficial for landscaping projects where precision is key. Additionally, the front axle design allows for a smooth ride, contributing to overall comfort during operation.

Another noteworthy characteristic of the Craftsman 917.374361 is its durable construction. Built with high-quality materials, this mower is designed to withstand the rigors of regular use. The deck is manufactured from heavy-duty steel, providing protection against wear and tear over time.

In terms of maintenance, the Craftsman 917.374361 is equipped with an easier access design that simplifies tasks such as oil changes and blade replacements. Its user-friendly controls are intuitive, making it accessible for beginners and experienced operators alike.

Overall, the Craftsman 917.374361 combines power, efficiency, and durability, making it a reliable choice for anyone seeking an effective lawn care solution. With its array of features, technologies, and solid performance, this riding lawn mower continues to stand out in the competitive landscaping market. Whether for personal use or commercial applications, it remains a staple for those wanting a well-manicured lawn with minimal effort.
Top Page Image Contents