Craftsman 917.273663 owner manual Mowing Tips, Purge Transmission

Page 14

3.Allow one minute for transmission to warm up. This can be done during the

engine warm up period.

•The attachments can be used during the engine warm-up period after the transmission has been warmed up and may require the choke control be pulled

out slightly.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be ad- justed for best engine performance (see "TO ADJUST CARBURETOR" in the Service and Adjustments section of this manual).

PURGE TRANSMISSION

_i:_CAUTION: Never engage or disengage freewheel lever while the engine is running. To ensure proper operation and per-

formance, it is recommended that the

transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the trans- mission which may have developed during shipping of your tractor.

IMPORTANT: Should your transmission require removal for service or replace- ment, it should be purged after reinstall- ation before operating the tractor.

1.Place tractor safely on level surface with engine off and parking brake set.

2.Disengage transmission by placing freewheel control in disengaged posi-

tion (See "TO TRANSPORT" in this section of manual).

3.Sitting in the tractor seat, start engine. After the engine is running, move throt- tle control to slow position. With motion control lever in neutral (N) position,

slowly disengage clutch/brake pedal.

4.Move motion control lever to full

forward position and hold for five (5) seconds. Move lever to full reverse

position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this step there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

5.Move motion control lever to neutral

(N)position. Shutoff engine and set parking brake.

6.Engage transmission by placing free- wheel control in engaged position (See

"TO TRANSPORT" in this section of manual).

7.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed.

With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

8.Slowly move motion control lever for- ward, after the tractor moves approxi- mately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five

(5)feet return the motion control lever to the neutral (N) position. Repeat this

procedure with the motion control lever three (3) times.

Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the

Service and Adjustments section of this manual.

•The left hand side of mower should be used for trimming.

•Drive so that clippings are discharged onto the area that has already been cut. Have the cut area to the right of the tractor. This will result in a more

even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds,

mow in the opposite direction making left hand turns until finished.

f

rf J

J

00272

•If grass is extremely tall, it should be mowed twice to reduce load and pos- sible fire hazard from dried clippings.

Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the at- tachment being used.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents CRRFT.TMRN Limited Warranty on Craftsman Riding Equipment Limited Warranty on BatteryGeneral Operation II. Slope OperationIII. Children IV. ServiceDo not API-SG-SL Repair Protection Agreements Sears Installation ServiceCustomer Responsibilities To Remove Tractor from Carton Unpack Carton HOW to SET UP Your Tractor Check BatteryAdjust Seat Check Deck Levelness ChecklistCheck for Proper Position ALL Belts Check Brake System@@@@ Know Your Tractor To Move Forward Backward To Transport To Adjust Gauge WheelsTo Operate Mower MentsADD Gasoline Before Starting the EngineCheck Engine OIL Level Automatic Transmission Warm UPMowing Tips Purge TransmissionGeneral Recommendations DatesBlade Removal BatteryOperator Presence System Transaxle Pump Fluid To Clean Battery and TerminalsTransaxle Cooling BeltsMuffler Clean AIR ScreenClean AIR INTAKE/COOLING Areas Spark PlugsTo Install Mower To Remove MowerAlternate SIDE-TO-SIDE Adjustment Method To Level Mower HousingSIDE-TO-SIDE Adjustment with Bubble Level To Replace Mower Drive Belt Mower Drive Belt InstallationBoth Front Plate Links Must be Equal in Length Mower Drive Belt RemovalTo Replace Mower Blade To Check and Adjust Brake To Replace Motion Drive BeltTo Remove Wheel for Repairs To Start Engine with a Weak BAT- TeryTo Remove Hood and Grill AS- Sembly Replacing BatteryTo Replace Headlight Bulb Preliminary Setting To Adjust Choke ControlTo Adjust Carburetor Final SettingEngine OIL TractorEngine Fuel System CylindersStart ProblemCause Correction Loss of power Problem Cause CorrectionProblem CauseSchematic Tractor - Model NumberElectrical Electrical KEY Part DescriptionTractor - Model Number 917,273663 Chassis and Enclosures Part Description Tractor - Model Number 917,273663 Ground Drive Tractor - Model Number Ground Drive KEY Part DescriptionTractor - Model Number 917,273663 Steering Assembly Tractor - Model Number 917.273663 Steering Assembly KEY Part DescriptionTractor - Model Number 917,273663 EngineTractor - Model Number 917,273663 Seat Assembly KEYKEY Part DecalsWheels Tires Lift Assembly KEY Part DescriptionTractor - Model Number 917,273663 Mower Deck Mower Deck RdhdRll KEY Part Description CYLINDERHEAD, Valveand Breather Crankcasej KEY Partdescription HeadnalveibreatherCrankcase IGNITION/ELECTRICALJ Blower Housing and Baffles Not Illustrated Blower Housing & Baffles KEY Part NO. NO.DESCRIPTIONPart AIR INTAKE/FILTRATION Not IllustratedOIL PAN / Lubrication J Screw, hex. flange Crankshaftj Crankshaft KEY Part NO. NO.DESCRIPTIONSuggested Guide for Sighting Slopes for Safe Operation Degrees MAXIiiiiiiiiiiiiiiiiOur Home

917.273663 specifications

The Craftsman 917.273663 is a powerful riding lawn mower designed to provide efficient and reliable lawn care. This machine embodies the quality and durability for which Craftsman is renowned. With its robust specifications, the 917.273663 is optimized for homeowners seeking a reliable solution for mowing larger properties with ease.

One of the standout features of this mower is its potent 17.5 HP engine, which delivers reliable power to maintain a consistent cut even when tackling thicker grasses or uneven terrains. The engine's design focuses on efficiency, ensuring that users can complete their mowing tasks quickly without worrying about overheating or performance dips.

The Craftsman 917.273663 sports a 42-inch cutting deck, allowing it to cover a larger area in fewer passes. This feature is particularly advantageous for those with expansive lawns, reducing mowing time while maintaining precision. The cutting height can be easily adjusted, offering versatility to adapt to different grass types and conditions. Users can choose among multiple cutting positions to achieve the desired lawn height.

Another technological highlight of this riding mower is its hydrostatic transmission. This system offers smooth and seamless acceleration without the need for manual shifting, making it easy for users to navigate their yards. The mower's zero-turn capability enables excellent maneuverability, allowing users to trim around trees, flower beds, and other obstacles with precision.

Comfort is key in the design of the Craftsman 917.273663. It features a spacious and ergonomically designed seat with armrests, which ensures that users can comfortably operate the machine for extended periods. The controls are intuitively placed for easy access, enhancing the overall user experience during lawn maintenance.

Durability is another hallmark of the Craftsman 917.273663. Its heavy-duty steel frame and deck construction can withstand the rigors of regular use. The mower is also designed with easy maintenance in mind, with accessible components for oil changes and blade replacements.

In conclusion, the Craftsman 917.273663 is a feature-packed riding lawn mower that combines power, efficiency, and comfort. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and durable construction make it a reliable choice for homeowners looking to maintain a pristine lawn. With its thoughtful design and user-friendly features, it's an excellent investment for anyone serious about their lawn care.
Top Page Image Contents