Craftsman 917.273663 owner manual To Remove Mower, To Install Mower

Page 19

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with auto- motive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and transmis- sion are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed

air or a leaf blower to remove grass, leaves and trash from tractor and mower.

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER- VICE OR ADJUSTMENTS:

1.Depress clutch/brake pedal fully and set parking brake.

2.Place motion control lever in neutral (N) position.

3.Place attachment clutch in "DISENGAGED" position.

4.Turn ignition key to "STOP" and remove key.

5.Make sure the blades and all moving parts have completely stopped.

6.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER

1.Place attachment clutch in "DISEN- GAGED" position.

2.If equipped, turn height adjustment knob to lowest setting.

3.Lower mower to its lowest position.

4.Disengage belt tension rod from lock bracket.

J_CAUTION: Rod is spring loaded. Have a tight grip on rod and release slowly.

5.Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-sway bar from bracket.

6.Remove four retainer springs from front plate assembly and remove plate.

7.Remove retainer springs from suspen-

sion arms at deck and disengage arms from deck.

8.Raise attachment lift to its highest posi- tion.

9.Slide mower forward and remove belt from electric clutch pulley.

10.Slide mower out from under right side of tractor.

TO INSTALL MOWER

Be sure tractor is on level surface and mower suspension arms are raised with

attachment lift control. Engage parking brake.

1.Swing anti-sway bar to left side of mower deck.

 

Lock Bracket

Front Mower

 

 

 

Belt Tension

Rod

 

 

 

Bracket

 

 

 

(Disengaged

,,'7

Electric Clutch

Double

Loop

 

Position)

"

Pulley

Retainer

Springs

 

 

 

 

 

Front Plate

Chassis

 

 

 

Assembly

Bracket --

 

 

 

 

 

Retainer

 

 

 

Single

Loop

S

 

 

 

 

 

 

Retainer Springs

 

 

 

 

 

 

 

 

Flanged

Pins

Bar

USE PLIERS FOR

RETAINER SPRINGS

Front Mower

Bracket

Suspension

Arms Double Loop Retainer Springs

(Outward pointingDeflector Shield deck pins)

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CRRFT.TMRN Limited Warranty on Battery Limited Warranty on Craftsman Riding EquipmentII. Slope Operation General OperationDo not IV. ServiceIII. Children API-SG-SL Customer Responsibilities Sears Installation ServiceRepair Protection Agreements Adjust Seat HOW to SET UP Your Tractor Check BatteryTo Remove Tractor from Carton Unpack Carton Check Brake System ChecklistCheck for Proper Position ALL Belts Check Deck Levelness@@@@ Know Your Tractor To Move Forward Backward Ments To Adjust Gauge WheelsTo Operate Mower To TransportAutomatic Transmission Warm UP Before Starting the EngineCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsDates General RecommendationsOperator Presence System BatteryBlade Removal Belts To Clean Battery and TerminalsTransaxle Cooling Transaxle Pump FluidSpark Plugs Clean AIR ScreenClean AIR INTAKE/COOLING Areas MufflerTo Remove Mower To Install MowerSIDE-TO-SIDE Adjustment with Bubble Level To Level Mower HousingAlternate SIDE-TO-SIDE Adjustment Method Mower Drive Belt Removal Mower Drive Belt InstallationBoth Front Plate Links Must be Equal in Length To Replace Mower Drive BeltTo Replace Mower Blade To Replace Motion Drive Belt To Check and Adjust BrakeTo Start Engine with a Weak BAT- Tery To Remove Wheel for RepairsTo Replace Headlight Bulb Replacing BatteryTo Remove Hood and Grill AS- Sembly Final Setting To Adjust Choke ControlTo Adjust Carburetor Preliminary SettingCylinders TractorEngine Fuel System Engine OILCause Correction ProblemStart Problem Cause Correction Loss of powerCause ProblemTractor - Model Number SchematicElectrical Part Description Electrical KEYTractor - Model Number 917,273663 Chassis and Enclosures Part Description Tractor - Model Number 917,273663 Ground Drive KEY Part Description Tractor - Model Number Ground DriveTractor - Model Number 917,273663 Steering Assembly KEY Part Description Tractor - Model Number 917.273663 Steering AssemblyEngine Tractor - Model Number 917,273663KEY Tractor - Model Number 917,273663 Seat AssemblyWheels Tires DecalsKEY Part KEY Part Description Lift AssemblyTractor - Model Number 917,273663 Mower Deck Rdhd Mower DeckRll KEY Part Description CYLINDERHEAD, Valveand Breather Crankcasej Crankcase HeadnalveibreatherKEY Partdescription IGNITION/ELECTRICALJ Blower Housing and Baffles AIR INTAKE/FILTRATION Not Illustrated Blower Housing & Baffles KEY Part NO. NO.DESCRIPTIONPart Not IllustratedOIL PAN / Lubrication J Screw, hex. flange Crankshaft KEY Part NO. NO.DESCRIPTION CrankshaftjDegrees MAX Suggested Guide for Sighting Slopes for Safe OperationIiiiiiiiiiiiiiiiiOur Home

917.273663 specifications

The Craftsman 917.273663 is a powerful riding lawn mower designed to provide efficient and reliable lawn care. This machine embodies the quality and durability for which Craftsman is renowned. With its robust specifications, the 917.273663 is optimized for homeowners seeking a reliable solution for mowing larger properties with ease.

One of the standout features of this mower is its potent 17.5 HP engine, which delivers reliable power to maintain a consistent cut even when tackling thicker grasses or uneven terrains. The engine's design focuses on efficiency, ensuring that users can complete their mowing tasks quickly without worrying about overheating or performance dips.

The Craftsman 917.273663 sports a 42-inch cutting deck, allowing it to cover a larger area in fewer passes. This feature is particularly advantageous for those with expansive lawns, reducing mowing time while maintaining precision. The cutting height can be easily adjusted, offering versatility to adapt to different grass types and conditions. Users can choose among multiple cutting positions to achieve the desired lawn height.

Another technological highlight of this riding mower is its hydrostatic transmission. This system offers smooth and seamless acceleration without the need for manual shifting, making it easy for users to navigate their yards. The mower's zero-turn capability enables excellent maneuverability, allowing users to trim around trees, flower beds, and other obstacles with precision.

Comfort is key in the design of the Craftsman 917.273663. It features a spacious and ergonomically designed seat with armrests, which ensures that users can comfortably operate the machine for extended periods. The controls are intuitively placed for easy access, enhancing the overall user experience during lawn maintenance.

Durability is another hallmark of the Craftsman 917.273663. Its heavy-duty steel frame and deck construction can withstand the rigors of regular use. The mower is also designed with easy maintenance in mind, with accessible components for oil changes and blade replacements.

In conclusion, the Craftsman 917.273663 is a feature-packed riding lawn mower that combines power, efficiency, and comfort. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and durable construction make it a reliable choice for homeowners looking to maintain a pristine lawn. With its thoughtful design and user-friendly features, it's an excellent investment for anyone serious about their lawn care.
Top Page Image Contents