![](/images/new-backgrounds/1310128/31012823x1.webp)
Getting started
Telephone base and charger installation
Install the telephone base and charger as shown below.
The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 9 for details.
Telephone base installation
Plug the large end of the telephone base power adapter into a power outlet not controlled by a wall switch.
Route the power adapter cord through this slot.
Raise the antenna.
Plug one end of the telephone line cord into a telephone jack or a DSL filter.
If you have DSL
Telephone line cord
Route the telephone line cord through this slot.
Plug the other end of the telephone line cord into the telephone jack on the back of the telephone base.
Plug the small end of the telephone base power adapter into the power adapter jack on the back of the telephone base.
Charger installation
Plug the power adapter into a power outlet not
controlled by a wall switch.
IMPORTANT INFORMATION
•Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
•The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,