AT&T ATTCL83201 user manual Make an outgoing call during PTT call, End or leave a PTT call

Multiple handset use

Push-to-talk (PTT)

Make an outgoing call during PTT call

• During a one-to-one PTT call, press PHONE/FLASH on your handset or /SPEAKER on your telephone base to get a dial tone. The PTT call

ends automatically.

•During a PTT call, press PHONE/FLASH on the initiating handset or /SPEAKER on the initiating telephone base. The PTT call ends automatically and you get a dial tone.

•During a PTT call, press PHONE/FLASH on any one of the destination handsets or press /SPEAKER on the destination telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants.

End or leave a PTT call

For one-to-one PTT calls, both initiating and destination devices can end the PTT call. For PTT calls to multiple devices, the initiating device can end the PTT call. If any one of the destination devices leaves the PTT call, the call continues until all participants or the initiator hangs up.

Press OFF/CANCEL on the handset or place the handset in the telephone base or charger, or press CANCEL on the telephone base. The screen shows Push to talk Ended.

NOTE: After PUSH TO TALK on the handset or PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or PTT on the telephone base within ten seconds, the PTT call ends automatically.

50