AT&T ATTCL83201 user manual Multiple handset use, Handset locator, To start the paging tone

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you misplace any handsets.

To start the paging tone:

•Press /HANDSET LOCATOR on the telephone base to start the paging tone on all handsets for 60 seconds.

NOTE: If you press OFF/CANCEL or MUTE/DELETE on a handset, the ringer of that handset stops, but the paging to the rest of the handsets continues.

To stop the paging tone:

•Press PHONE/FLASH, /SPEAKER�� � , or any dialing key (0-9, TONE or #) on the handset(s).

-OR-

•Press /HANDSET LOCATOR, MUTE or CANCEL on the telephone base.

**Paging**

Join a call in progress

When a handset or the telephone base is already on a call and you would like to join the call, press PHONE/FLASH or /��SPEAKER� on your handset or /SPEAKER�� � on your telephone base.

To end the call using a handset, press OFF/CANCEL or place the handset in the telephone base or charger. To end the call using the telephone base, press /SPEAKER�� � . The call does not end until all handsets and the telephone base hang up.

NOTE: You can use up to four system handsets and the telephone base at the same time on an outside call.

40