Multiple handset use
Push-to-talk (PTT)
PTT call to a single device
Using a cordless handset:
1.There are a few ways to begin a PTT call to a single device. When the handset is not in use:
•If you have one handset, press and hold PUSH TO TALK.
•If you have more than one handset:
w Press PUSH TO TALK on the handset. Then use the dialing keys to enter the destination device number.
w Press PUSH TO TALK on the handset. Press qCID or pDIR to highlight the destination device number. Then press MENU/SELECT or PUSH TO TALK.
The handset shows Connecting to HANDSET X...
(HANDSET represents the handset name, X represents the destination handset number) or Connecting to BASE 0...
(BASE represents the base name) for a few seconds. When the connection is made, both your and the destination device screens display Press and hold [PTT] to talk.
2.Press and hold PUSH TO TALK. A chirp indicates your microphone is on. Speak towards the device. Your voice is broadcast to the destination device.
While you are speaking, your handset shows PTT To handset: X or PTT To base.
PUSH TO TALK
>Handset X
p q
Connecting to
Handset X...
p q
Press and hold
[PTT] to talk
PTT To
handset: X
3.Release PUSH TO TALK after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk. Then you can
press and hold PUSH TO TALK to continue speaking or the destination device can respond (see Answer a PTT call on page 48).
4.To end the PTT call, press 
OFF/CANCEL or place the handset in the telephone base or charger. The handset shows Push to talk Ended for a few seconds.
45
