AT&T ATTCL83201 user manual Press MENU/SELECT. The screen briefly shows

Telephone settings

Telephone base settings

Use caller ID to automatically set date and time

If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. Follow the steps below to turn the CID time sync feature on or off. The default setting is On.

1.When the handset is in idle mode, press MENU/SELECT to enter the main menu.

2.Press qCID or pDIR to scroll to >Settings, then press

MENU/SELECT.

3.Press qCID or pDIR to scroll to >CID time sync, then press MENU/SELECT.

4.Press qCID or pDIR to highlight >On or >Off, then press MENU/SELECT to save. There is a confirmation tone and the screen returns to the previous menu.

Home area code

Key tone >CID time sync

p q

CID TIME SYNC >On

p q

If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID history only displays the seven digits of the telephone number.

This feature makes it easy for you to place a call from the caller ID log. If you dial ten digits to make a local phone call, do not use this home area code feature. If you do, you cannot place local calls from your caller ID log, as they will have only seven digits.

To set the home area code:

1.Press MENU/SELECT in idle mode to enter the main menu.

2.Use qCID or pDIR to scroll to >Settings, then press MENU/SELECT.

3.	Use qCID or pDIR to scroll to >Home area code, then	CID time sync
	press MENU/SELECT. The screen briefly shows
		>Home area code
	Only for 7 digit dial from CID.	p
4.	Use the dialing keys to enter a three-digit home	q
	area code.
		HOME AREA CODE
	• Press X/DELETE to delete a digit.
		___

•Press and hold X/DELETE to delete all digits.

5.Press MENU/SELECT to save. There is a confirmation

tone and the screen shows Area code will not show in CID briefly before returning to the previous menu.

NOTE: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code plus telephone number), you need to delete your home area code and dial out locally from the caller ID log. With the home area code displayed, press and hold X/DELETE until the digits are deleted, and then press MENU/SELECT.

The home area code is now restored to its default setting of _ _ _ (empty).

27