HP XU700 Detect and install external parallel ports, Initialize PC-compatible PnP ISA devices

6 Tests and Error Messages

Order in Which POST Tests Are Performed

Checkpoint		MaxiLife LCD	Beep
	POST Routine Description	Display
Code			Codes
		Message
84h	Detect and install external parallel ports
85h	Initialize PC-compatible PnP ISA devices
86h	Re-initialize onboard I/O ports
87h	Configure System Board Configurable Devices (optional)
88h	Initialize BIOS Data Area
89h	Enable Non-Maskable Interrupts (NMIs)
8Ah	Initialize Extended BIOS Data Area
8Bh	Test and initialize PS/2	Mouse PS2 Test
8Ch	Initialize floppy controller
8Fh	Determine number of ATA drives (optional)
90h	Initialize hard disk controllers	Disc Ctrl. Init.
91h	Initialize local-bus hard disk controllers	Disc Bus Init.
92h	Jump to UsersPatch2	Maxilife Test
93h	Build MPTABLE for multi-processor boards
95h	Install CD-ROM for boot	CDROM Ctr. Init.
96h	Clear huge ES segment register
97h	Fix up Multi Processor table
98h	Search for option ROMs.	Opt. Rom Detect.
99h	Check for SMART drive
9Ah	Shadow option ROMs
9Ch	Set up Power Management
9Dh	Initialize security engine (optional)
9Eh	Enable hardware interrupts
9Fh	Determine number of ATA and SCSI drives	Check ATA / SCSI
A0h	Set time of day

109