5 HP BIOS

Clearing the CMOS

Clearing the CMOS

1Turn off the PC Workstation, disconnect the power cord and all cables, then remove the cover.

2Set the system board switch 8 to the ON position.

3Replace the cover, and reconnect the power cord and video cable.

4Reboot the PC Workstation. A message similar to the following will be displayed:

“Configuration has been cleared, set switch Clear to the

ON position before rebooting.”

5Turn off the PC Workstation, disconnect the power cord and video cable, and remove the cover.

6Set the system board switch 8 to the OFF position.

7Replace the cover, and reconnect the power cord and data cables.

8Switch on the PC Workstation. Run the Setup program by pressing F2. Then press F9, the CMOS default values will be automatically downloaded and saved.

9Press Esc to save the configuration and exit from the Setup program.

89