HP XU700 manual System Info, Boot Steps, Boot report

6 Tests and Error Messages

MaxiLife Test Sequence and Error Messages

System Info	Obtains information from the BIOS and the system’s Serial EEPROM. This
	information includes: product name, BIOS version, serial number, number of
	processors and speed, size of memory for each socket. The following
	diagram shows how the System Info obtains its information.

System Info

strings in EEPROM MaxiLife

Write

BIOS

DMI Table

HP Kayak XU700

Info Services

LCD Status Panel

Boot Steps	Shows the Power-On-Self-Test (POST) codes during the system startup.
	The POST code is provided by the BIOS and is displayed on the LCD panel
	as soon as it is available. If the system stops during the startup, the last
	successful boot step POST code is displayed on the LCD. When Boot Steps
	is selected, the POST step will be shown on the LCD status panel during the
	subsequent boot processes.
	To ensure that MaxiLife is ready to display the first POST codes as soon as
	possible, the Pre-boot diagnostics are not executed when the system is
	booted with the Boot Steps option selected. The following diagram shows
	how Boot Steps obtains its information from the BIOS, and then displays a
	POST error if needed.

System Info

Boot Steps

Next Ok

This is a toggle item, which is indicated with a check mark

“Write

POST Code”

MaxiLife

BIOS

“Write

POST ERROR”

HP KAYAK XU700

Post Code 24

Error

Post Code XX

Boot report	Runs a set of diagnostics assessing the system’s components. Results of the
	tests are displayed on the LCD status panel, one after another, when the
	LCD	buttons are pressed.

103