2System Board FirmWare Hub (82802AB)

FirmWare Hub (82802AB)

The FWH (also known as flash memory) is connected to the LPC bus. It contains 4 Mbit (512 kB) of flash memory.

The hardware features of the FWH include: a Random Number Generator (RNG), five General Purpose Inputs (GPI), register-based block locking and hardware-based locking. An integrated combination of logic features and non-volatile memory enables better protection for the storage and update of system code and data, adds flexibility through additional GPIs, and allows for quicker introduction of security/manageability features.

The following table shows the available FWH features.

 

Feature

 

Feature

 

 

 

 

•

Platform Compatibility:

•

Two Configurable Interfaces:

 

❒ Enables security-enhanced platform infrastructure.

 

❒ FirmWare Hub interface for system operation.

 

❒ Part of the Intel I840 chipset.

 

❒ Address/Address Multiplexed (A/A Mux) interface.

 

 

 

 

• FirmWare Hub Interface Mode:

• 4 Mbits of Flash Memory for system code/data non-volatile

 

❒ Five signal communication interface supporting x8 reads and

 

storage:

 

 

 

 

writes.

 

❒ Symmetrically blocked, 64 Kbyte memory sections.

 

❒ Register-based read and write protection for each code/data

 

❒ Automated byte program and block erase through an

 

storage blocks.

 

integrated WSM (Write State Machine).

 

❒ Five additional GPIs for system design and flexibility.

 

 

 

❒ A hardware RNG (Random Number Generator).

 

 

 

❒ Integrated CUI (Command User Interface) for requesting

 

 

 

access to locking, programming and erasing options. It also

 

 

 

handles requests for data residing in status, ID and block lock

 

 

 

registers.

 

 

 

❒ Operates with 33 MHz PCI clock and 3.3 V input/output.

 

 

 

 

 

 

 

 

• A/A Mux Interface/Mode, supporting:

•

Power Supply Specifications:

 

❒ 11-pin multiplexed address and 8-pin data I/O interface.

 

❒ Vcc: 3.3 V +/- 0.3 V.

 

❒ Fast on-board or out-of-system programming.

 

❒ Vpp: 3.3 V and 12 V for fast programming, 80 ns.

 

 

 

 

 

 

•

Industry Standard Packages:

• Case Temperature Operating Range.

 

❒ 40L TSOP or 32L PLCC.

 

 

 

 

 

 

54

Page 54
Image 54
HP XU700 manual FirmWare Hub 82802AB, Following table shows the available FWH features