Craftsman 917.272281 To Replace Headlight Lamp, Interlocks and Relays, To Replace Fuse

Page 27

7.ConnectBLACKgroundingcableto negative(-) batteryterminalwith remaininghex bolt and keps nut. Tightensecurely

8.Closeterminalaccessdoors.

9, Closehood.

HexBolt

KepsNut

Terminal

Door

Cable

,Negative

Guard(Black)

Cable

TO REPLACE HEADLIGHT LAMP

CAUTION: When lit, the halogen lamps get extremely hot. Hold lamp

assembly by the holder and do not touch the bulb.

1.Raise hood.

2.Disconnect harness from lamp assembly.

3.Rotate counterclockwise and pull lamp assembly out of the hole in the backside of the grill.

4.Insert new lamp assembly and rotate clockwise to lock.

5.Reconnect harness to lamp assembly.

6.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged widng may cause your tractor to run poorly, stop running, or prevent it from starting.

• Check wiring. See electrical wiring

diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS- SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at

sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to

reconnect the headlight wire connec- tor.

27

Image 27

Contents Icrrftsmrwi Limited Warranty on Craftsman Riding Equipment II. Slope Operation General OperationIII. Children IV. ServiceRemove obstacles such as recks, tree limbs, etc Customer Responsibilities 3RODUCT SpecificationsAPI-SF-SJ Repair AgreementVideo Cassette Adjust Seat Check BatteryTo Remove Tractor from Carton Unpack Carton To Convert to Bagging or Discharging Install Mulcher PlateCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsO6 o @@@@@ Knowyour Tractor Ground Drive HOW to USE Your Tractor Engine To SET Parking BrakeTo USE Choke Control Mower BladesTo Operate on Hills To Adjust Gauge WheelsTo USE Cruise Control To Operate MowerADD Gasoline To TransportMents Before Starting the Engine Check Engine OIL LevelPurgetransmission Automatictransmission Warm UPMowing Tips Mulching Mowing TipsLubrication Chart General RecommendationsBefore Each USE Tractor BatteryEngine Lubrication To Clean Battery and TerminalsTransaxle Cooling Transaxle Pump FluidAIR Filter Engine OIL FilterGaged CleaningService or Adjustments Install Mower To RemoveTo Level Mower Housing SIDE-TO-SIDE Adjustment with Bubble LevelAlternate SIDE-TO-SIDE Adjustment Method To Replace Mower Blade Drive Belt Belt InstallationBelt Removal Both Front Plate Unks Must be Equal in LengthTo Adjust Brake Belt InstallationTo Replace Motion Drive Belt To Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Remove Wheel for Repairs To Remove Hood and Grill AS- Sembly To Replace Headlight LampInterlocks and Relays To Replace FuseEngine To Adjust CarburetorTo Adjust Throttle Control Cable To Adjust Choke ControlEngine OIL EngineOther BatieryTroubleshootingchart CauseCorrection Cause Troubleshooting ChartProblem CorrectionProblem Cause Correction Tractor -- Model Number Schematic Electrical Tractor -- Model NumberKEY Part NO. NO. Description Tractor -- Model Number ElectricalTractor - Model Number 917.272281 Chassisand Enclosures KEY Part Description TRACTOR-- Model Number 917.272281 Chassis and EnclosuresTractor -- Model Number Grounddrive KEY PARr Tractor -- Model Number 917.272281 Steeringassembly Tractor - Model Number 917.272281 Steering Assembly Optional Equipment Tractor -- Model Number EngineSee Engine Breakdown KEY Part TRACTOR- Model Number SeatassemblyDecals Wheels & TiresTractor - Model Number Lift Assembly TRACTOR-- Model Number Lift Assembly Tractor -- Model Number Mower Deck Tractor -- Model Number Mowerdeck € z c Drag 878 742 =,T Gear-Governor 505 Tractor - Model NumberPage Page Suggested Guide for Sighting Slopes for Safe Operation Part