Craftsman 486.245981 INSTRUCTiONS for Single Suspension Bracket Tractors, See Figure, Nut

iNSTRUCTiONS FOR SINGLE SUSPENSION BRACKET TRACTORS

STEP 1 : (SEE FIGURE 2)

Open parts bag labelled "A" and verify that all parts are present.

HARDWARE SHOWN FULL SiZE

EXCEPT WHERE NOTED

..... C

NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor.

STEP 2: (SEE FIGURE 3)

Remove tractor hood. (Refer to tractor manual.) Remove the browning shield as shown.

STEP 3: (SEE FIGURE 4)

Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for second plug.

STEP 4: (SEE FIGURE 5)

Insert a carriage bolt into the second mounting hole from the front of the tractor frame and fully tighten a

whizlock nut onto the bolt. Repeat on other side of tractor.

(not full size)

PARTS BAG "A"

FIGURE 2

Ref.	Part	Qty.	Description
A	43350	4	Carriage	Bolt, 3/8-16 x 1"
B	44072	4	Whizlock	Nut, 3/8"
C	R19171616	4	Washer,	1/2"x1"
D	44742	2	Plug
	65932	1	Bumper

REMOVE

FRONT SCREWS

\

	REMOVE
	BROWNING SHIELD		FIGURE 3
	BUMPER
	-.._
PUSH DOWN
WmTH EVEN
PRESSURE
WORK	BENCH	SHORT	STEP
OR SOLID	TABLE _ _,,_...----_	PLUG
		_-_>	F,GURE 4

CARRIAGE BO_

AND WASHER

WHIZLOCK

NUT

FIGURE 5

Catt1-866-576-8388formissingpartsorassemblyhelp	3
DO NOT RETURN TO STORE