Acoustic Research AW791 Charging, Batteries, Iii. Connecting to Analog Components

iii. Connecting to Analog Components:

You can connect the headphones to an analog device and listen to Dolby Pro Logic recordings and compact discs.

III	Charging
	the
	Batteries

TRANSMITTER
CHANNEL
A	B C
AC 7V
DIGITAL 1	DIGITAL 2	ANALOG 3
			VCR
			OUTPUT		INPUT
			RIGHT	LEF T V ID EO	RIGHT LEF T V ID EO
		ANTENNA	TV
		IN	OUT

1.Connect one end of the Analog Audio Cable (not included) to the RCA-TYPE ANALOG AUDIO OUTPUT of your audio/video equipment.

2.Connect the other end of the Analog Audio Cable to the RCA-type Analog Left/Right Connectors (F3) on the transmitter marked “Analog 3”.

Note: The rechargeable batteries included with this product must be charged for 10 hours before use.

i.Inserting the Batteries into the Headphones:

1.	Remove the Battery Compartment
	Cover (I) by simultaneously
	depressing the tab and pulling up on
	the cover.
2.	Pull the cloth strip across the Battery
	Compartment (H) so the
	Rechargeable Batteries (P) can be
	inserted over the strip.
3.	Insert the Rechargeable Batteries (P)

Note: When using a device with a variable analog output, make sure the volume level is set to 1/2 to 2/3 volume. When using a variable level output, noise may occur if the signal level is too weak or too strong. Adjust the volume to eliminate the noise.

+	–
	+

–	+
	–

observing the polarity ("+" and "-") as

diagrammed inside the Battery

Compartment (H).

4. Replace the Battery Compartment

Cover (I).

iv. Connecting the Power Supply:

ii. Charging the Batteries within the Headphones:

TRANSMITTER

CHANNEL
A	B	C

AC 7V

DIGITAL 1 DIGITAL 2 ANALOG 3

1.Insert the 2.5mm barrel connector from the AC Power Supply (O) into the AC Input Jack (E).

2.Plug the AC Power Supply

(O) into a standard electrical wall outlet.

1. Place the headphones onto the

Transmitter, making sure the

charging contact on the left earcup is

sitting properly on the charging post

of the transmitter.

2.	Allow the Rechargeable Batteries (P)
	to fully charge for 10 hours before
	using for the first time.
3.	Place the headphones on the
	transmitter when not in use. This will
	ensure the batteries are always fully
	charged for hours of entertainment.
	The Rechargeable Batteries (P) use

Note: Make sure the electrical outlet is not a switched outlet - usually designed to control a lamp - and remains ON at all times. This is important, as the transmitter base charges the headphones when not in use.

- 4 -

SS 1 2 3	high-capacity Ni-MH cells that allow
	recharging without the memory
	effect of Ni-CD cells.

For customers in the USA and CANADA

RECYCLING NICKEL METAL-HYDRIDE BATTERIES

Nickel Metal-Hydride (Ni-MH) batteries are recyclable. Acoustic Research asks you to help preserve our environment and recycle any unwanted Ni-MH batteries at your nearest recycling facility for proper disposal.

Acoustic Research participates in the Rechargeable Battery Recycling Corporation (RBRC) program. If you need advise on proper disposal of the included Ni-MH batteries, please call 1-800-822-8837 (US and CANADA ONLY).

Caution: Do not handle damaged or leaking batteries.

- 5 -