OJ=1 ,JIII | Craftsman 486.24635 manual

•Place the loosely assembled frame onto the rear of

the b'actor,hooking the notched ends of the mounting brackets under the shoulder bolts, Attach the hitch

bracket to the tractor hitchusing the clevis pin and a

1/8" hairpin clip. See figure 6.

•Align the frame so that it is straight and level with the tractor. Tighten the four 5/16" x 3/4" hex bolts (assembled in figure 4) which fasten the mounting brackets to the hitch bracket.

•Slide the 3/8" x 1" hex boltsalong the hitch bracket slots untilthey are bumped up against the back edge of the tractor hitch.Tighten. See figure 6.

3/8" x 1"
HEXBOLT'-----.	I	I
I	I	t SHOULDER

BOLT

F 6

•Place the tool box onto the frame so that the heads of the shoulder boltsin the bottom of the tool box fit down intothe keyhole slots. Slide the tool box forward, slightlytilting up the back end, untilthe clevis pins in the bottomof the tool box drop down into the holes at the rear of the frame. Secure the tool box to the frame with two 1/8" hairpin clips through the clevis pins. See figure 7.

•Tighten the two bolts (assembled in figure 5) which fasten the brace strap to the mountingbrackets. The strap keeps the frame at the correct alignmentwidth

when removingand reattachingthe frame and the tool box.

[o]"J=1: ,JIII

&CAUTION: Vehicle braking and stability may be affected with the addition of an

accessory or en attachment. Be aware of changing conditions on slopes.

•Engage the tractor clutch smoothly whert starting the tractor in motion. Sudden, full throttle starts could cause the front end of the tractor to lift off the

ground, causing loss of steering control.

•Fill the Trac Pack with up to 100 pounds of material or tools.

•Do Not exceed the 100 pound weight capacity of the Trec Pack.

•To remove the tool box from the Trac Pack frame, 'remove the 1/8" hairpin clips from the two clevis pin in the bottom of the tool box. Lift up the rear of the

tool box enough to raise the pins o,t of the frame

end then pull back and up tO remove the heads of the shoulder bolts from the slots in the frame.

•To remove the Trac Pack frame from the tractor,

remove the 1/8" hairpin clip end the clevis pin from the hitch bracket. Unhook the frame from the shoulder bolts on the sides of the tractor and

remove the frame. The shoulder bolts may be left permanently attached.

•	Rinse or wipe off the Trac Pack after each use.	• Store inside in a clean, dry area.
•	Do not store with material in the tool box.

486.24635 specifications

The Craftsman 486.24635 is a robust and versatile lawn mower that stands out in the marketplace for its performance and reliability. This particular model is designed to meet the needs of homeowners seeking an efficient solution for maintaining their lawns. Featuring a powerful engine, the Craftsman 486.24635 ensures a smooth operation, making yard work less of a chore and more of a satisfying task.

One of the main features of the Craftsman 486.24635 is its cutting deck, which boasts a generous width that allows for more efficient cutting and reduces the time spent mowing. The cutting height is fully adjustable, accommodating various grass types and conditions, ensuring a clean and even cut regardless of the season. This flexibility is appreciated by both novice and experienced users, as it allows for personal preferences in lawn aesthetics.

In terms of technology, the Craftsman 486.24635 incorporates advanced engineering to provide a reliable and user-friendly experience. It is equipped with a reliable engine that offers both power and fuel efficiency, enabling users to cover larger areas without frequent stops for refueling. The mower's design also promotes easy maneuverability, allowing users to navigate tight spaces and around landscaping with ease.

The 486.24635 features ergonomic handles that promote comfort during extended use, reducing fatigue and enhancing control. Additionally, the model includes an easy-start mechanism, which eliminates the hassle often associated with starting gas-powered equipment. This feature is particularly beneficial for users who may not have extensive experience with lawn maintenance.

Another notable characteristic of the Craftsman 486.24635 is its durable construction. Made with high-quality materials, the mower is designed to withstand the rigors of regular use. Its resilience ensures longevity, providing excellent value for the investment. Moreover, the mower is easy to maintain, with accessible components that facilitate routine checks and servicing.

Overall, the Craftsman 486.24635 combines powerful performance, advanced technology, and user-friendly features to offer an outstanding lawn care solution. This model is ideal for anyone looking to achieve a pristine lawn with minimal effort, making it a top choice among homeowners. Its mix of durability, efficiency, and ease of use sets it apart in the competitive lawn care market.